Dissertation > Excellent graduate degree dissertation topics show
Research on the Parameters of Temperature and Pressure Based on Optical Fiber
Author: CuiWenJia
Tutor: LiuLiHua
School: Harbin Institute of Technology
Course: Instrument Science and Technology
Keywords: Optical Fiber Sense Measurement of Temperature and pressure Reflective Light Intensity-modulated GaAs
CLC: TP274
Type: Master's thesis
Year: 2008
Downloads: 109
Quote: 1
Read: Download Dissertation
Abstract
|
With the advancement and extension of Optical fiber, extensive attention is paid to the technique of Optical fiber sense in the field of industry, medical treatment and national defence. How to measure the parameters of liquid is the hot researching problem for the industries. It is the key problem for researching corresponding sensing technology.A method and operative technology for measuring the parameters of temperature and pressure are discussed in this paper based on fiber sensing technique. The system is suitable for the conditions of high temperature, glutinous and strong electromagnetic interference space.First starting with the realization of measurement system, the paper introduces the scheme to design and configuration. The system is composed of ray-launching module, transmission cable, sense module and signal-collection and signal-disposing module. The paper introduces the theory of how to measure the parameters of temperature and pressure in the system and accomplish the design and calculation of the configuration and parameters. It bases on the theory of reflective light intensity-modulated fiber optic sensor and the related characteristic between the rate of ray-permeating of GaAs wafer and actualizes the synchronization and real time measure. Simultaneity the paper introduces the design and function realized of the measurement system software. It is realized with the data collection interface clip of HK-PC812 and the system of Visual Basic. It finishes the debugging of software and hardware of the measurement system. Stability, repeatability, static and dynamic accuracy of measured system is tested in the end and the result and error of experiment is analyzed.Theory analysis and practical debugging indicate that both software and hardware design are correct and satisfy the requirements.
|
Related Dissertations
- Simulation Study of Ⅲ-V GaAs-based Compound Semiconductor Solar Cell,TM914.4
- CNC chip delay line broadband development,TN402
- Design of Ka-band Image-Reject Down-Converter MMIC,TN454
- Indoor Measurement and Parameter Analysis for GaAs Multijunction Solar Cell,TM914.4
- The Microscopic Character and Distributing of Defects in Large Diameter SI-GaAs,TN304.2
- GaAlAs / GaAs photocathode assembly mechanism of material,TN304.2
- Searching the Growth Engine of GaAs Industry,F426.6
- The Study on Dislocation Pattern and Hardness of Germanium Single Crystal for GaAs Space Solar Cells,O782
- Research on Epitaxial Growth and Optical Properties of InAs/GaAsSb Quantum Dot,O471.1
- RF MEMS Microwave Power Sensor Design and Analysis,TP212
- Study on the Process of Gate Fabrication in GaAs Process,TN305.7
- High-k gate dielectric / semiconductor substrate interface passivation and performance improvements,TN304
- Investigation of Thermal Design Technology for High-power GaAs Photoconductive Semiconductor Switches,TN36
- HVPE grown GaN thick film technology research,TN304
- Dark Characteristic and Annealing Effects of Gaas Solar Cells Irradiated by Charged Particles,TM914.4
- Research on the Application of Virtual Instruments Technology in the MBE/RHEED Experiments,TP274
- Design and Realization of RFIC Power Amplifier,TN722.75
- Study of Structure and Optical Characteristics of GaAs/GaN Grown by Molecular Beam Epitaxy,TN304.055
- Research of GaAs Microwave Power MMIC Technology,TN454
- A Novel Combined Switch Based on GaAs PCSS and Sparp Gap: Experiments and Analysis,TN25
- Performance Analysis of THz Generated by SI-GaAs Photoconductive Antenna,TN25
CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system
© 2012 www.DissertationTopic.Net Mobile
|