Dissertation > Excellent graduate degree dissertation topics show

Sent by the take-up control system based on the DSP 's rapier electronic

Author: LinMeng
Tutor: PanSongFeng
School: Qingdao University
Course: Control Theory and Control Engineering
Keywords: ELO ETU DSP AC servo system tension control
CLC: TP273
Type: Master's thesis
Year: 2009
Downloads: 69
Quote: 0
Read: Download Dissertation

Abstract


Electronic Let-off (ELO) and electronic take-up (ETU) are the major salient features of modern advanced boms. The use of ELO & ETU can improve the quality of products, avoid the defect of fabrics, and achieve any regulation of weft density and fast-changing varieties of weaving. The ELO & ETU system has simple structure, high sensibility and easy operation. It becomes an important direction of the textile industry. At present, the pivotal control units of ELO & ETU devices at domestic advanced boms come from abroad directly. But they are expensive, difficult to maintain, and enslaved to others in technology, unable to meet the large number of domestic requirement.Therefore, an ELO & ETU control system of the rapier looms based on earlier research is put forward in this paper; it uses DSP (digital signal processor) as its main controller, and AC servo technology, to realize the control of tension and weft density in the let-off and take-up processes. The main tasks are as follows:First, the use of Digital PID-based control strategy of tension compensation. Parameters can be established by HMI or configuration software in host-computer at real time and the productive situation can also be monitored, then the precise control of the tension and weft density are realized.Second, eight kinds of tension and weft density can be set ahead of time as the default values of system. And can be adjusted according the user’s requirement at real time, or switch between the default values, even realize stepless adjustment.Third, tension is compensated before and after the starting of main motor in the loom to avoid starting marks. Loom tension is restored before starting of main motor and tension of is compensated according to the number of weft at the beginning of weaving process, the number of weft and the quantity of compensation can be set and adjusted by practical aspects of productive situation.Through several scene debuggings in productive situation, the system runs stable currently; it can achieve the production process requirements at a lower cost.

Related Dissertations

  1. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  2. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  3. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  4. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  5. Research on Synchronous Motor Excitation Control System,TM341
  6. The AES Algorithm and Its Implementation in DSP,TN918.1
  7. The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
  8. Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
  9. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  10. Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
  11. A Study on the Technology of the Infrared Image Matching,TP391.41
  12. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  13. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2
  14. Research on DSP-based Auto-focusing Systems,TP391.41
  15. Research on the Grid-connected Photovoltaic System Based on Cascaded Multilevel Inverter,TM464
  16. The Application Design of Fuzzy PID Control Algorithm in the Trellis Film Machine Control System,TP273
  17. A Novel Controller Design for Active Power Filter with Low Switching Loss,TN713.8
  18. Simulation System for Aluminum Foil Cold Mill and Research of Tension Control,TG334.9
  19. Research on Control of Direct Driving Type WTG Grid Converter Based on DSP,TM46
  20. Study on DSP-based Double-wire Welding Machine and Its Human-machine Interface,TG409
  21. Interface Driver Design and Realization of Mutiple-dsp Parallel Processing for Route Planning System,TP368.12

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile