Dissertation > Excellent graduate degree dissertation topics show

Application of FCC Diesel Hydrofining-dewaxing Composite Technology

Author: ZuoGuoXin
Tutor: LvChunSheng；ZhangMingDe
School: Northeast University of Petroleum
Course: Chemical Engineering
Keywords: diesel hydrofining isodewaxing desulfurization pour point
CLC: TE624.433
Type: Master's thesis
Year: 2011
Downloads: 253
Quote: 0
Read: Download Dissertation

Abstract


Because of the cold winter weather in the northern area, the lowing pour point diesel oil greatly demanded by the motor vehicles. So the hydrofining and hydrodewaxing process which are used in refining the Catalytic diesel and distillate oil(based on wax) to obtain the high-quality diesel with low pour point has a great potential market. The technology has been put into use in the 20×104 t/a hydrofining and hydrodewaxing unit of Qianguo Petrochemical Company to produce -35# and -20# refined diesel oil with low freezing point and meanwhile also produce 0# refined diesel oil usually used in summer .Catalytic cracking unit uses the new technology MIP in company overhaul in 2007.Catalytic diesel oil can obtain the high quality diesel oil through hydrotreating by hydrogenation equipment. catalyst used by the unit is the catalyst hydrodewaxing developed and produced by ChangChun HuigGong company . ZSM一5 molecule sifting catalyst is modified by special treatment process to form HPDW-1 type Hydrodewaxing catalyst, which is with selectivity, anti-ammonia and other characteristics.Inferior diesel oil or distillate oil(based on wax)is firstly put into the Hydrogen refining catalyst beds for hydrofining, then directly to hydrodewaxing catalyst beds for their cracking through shape-selective catalyst, and finally the cracking material will be further refined after hydrogen added.Experiments have proven that hydrofining and hydrodewaxing process at low temperature and pressure condition can down the pour point of diesel oil below -35℃during dealing with Catalytic light diesel oil. The desulfurization and enitrification rate of diesel oil is high, even if refining the poor-quality Catalytic diesel oil, the sulfur content, oxidation stability and other quality of the product also can meet the quality index of light diesel oil. Therefore the process is an effective way to produce the high-quality diesel oil with low freezing point .The result of experiments and industry application shows that the activity of FH-98 and HPDW-1 catalyst is fit for each other and can be arranged in the single stage. The technology is effective both in hydrofining and isodewaxing. It can produce diesel with low pour point, ultra-low sulfur, low density, low T95 and high cetane number. The successful industry application offers a new route to produce clean diesel, and it is suitably for north refinery’s demand.

Related Dissertations

  1. Study of Simultaneous Desulfurization and Denitrification with Calcic-Based Absorbent in a Fixed Bed,X701.3
  2. Numerical Simulation of Atomization and Evaporation Processes in Multi-Spouted FGD Reactor,X701.3
  3. Synthesis of Benzimidazolium Ionic Liquids and Their Application in Extraction Separation,O626.23
  4. LF thermal state slag recycling desulfurization behavior of the process,X757
  5. Study on the Chimisorption Removal of FCC Gasoline Sulfur Compound,TE624.55
  6. High Pressure Common Rail Diesel Engine Fueled with Biodiesel test under different atmospheric pressure,TE667
  7. Domestication of Acidithiobacillus Ferroxidans and Its Application to Bio-desulfuration of Coal,X701.3
  8. Applied Research of Emulsified Fuel on S195 Diesel Engine,TE626.24
  9. Research of Two-Step Chemotrophic Microbial Reactor Removing Hydrogen Sulfied from Biogas,X703
  10. Shale ash sintered brick sintering process fixed and sulfur sulfur release pattern of,X701.3
  11. CAD/CAPP/CAM Integrated System Development for Key Components in Marine Diesel,U664.121
  12. Research on the Cast Iron Inoculation Process Optimization,TG255
  13. Simulation and Research on Fuel Injection System of Diesel Dump Truck,U464.136
  14. Diesel exhaust catalytic combustion of soot particles,O643.36
  15. Influence of Aromatic and Nitrogen Compounds on Desulfurization onto Activated Carbon,TE624.5
  16. The Multi-Application and Implementation of Auxiliary Control Network in Power Plant Desulfurization Systems,TP311.52
  17. Study on Simultaneous Catalytic Reduction of Sulfur Dioxide and Nitric Oxide Over Iron Catalyst Doped with Rare Earth Oxide,X701.3
  18. Marine diesel engine condition monitoring and diagnostic system development,U664.121
  19. Bio-diesel engine simulation and analysis of waste heat recovery,TK429
  20. The Research of Unsupported Catalyst for Distillate Oil Hydrorefining,TE624.93
  21. Causes and Measures of Engine Block Leakage,TK428

CLC: >
© 2012 www.DissertationTopic.Net  Mobile