Dissertation > Excellent graduate degree dissertation topics show

Study on Influences of the Drilling Tools Rotating to Cuttings Removal in Building Inclined Section

Author: MouYanYu
Tutor: AiChi
School: Northeast University of Petroleum
Course: Oil and Gas Well Engineering
Keywords: building inclined section cuttings removal drilling tools rotating critical velocity
CLC: TE28
Type: Master's thesis
Year: 2011
Downloads: 152
Quote: 0
Read: Download Dissertation

Abstract


The curve section cuttings are easier to deposit to the down sidewall under gravity then form cuttings bed. The cuttings bed existence has brought drilling many safety problems. Those problems include that high friction and torque, bit freezing, pump choking up, adhere sticking, failing to communicate drilling pressure to drill bit, can’t explain wells direction change, drilling fluid leaking into the production formations and affect the ultimate recovery, drilling slow even jams borehole to cause borehole scrapped. Consequently, cuttings removal of building inclined section is the key point to ensure drilling security and improve cementing quality.The curve section drilling tools turn to down sidewall because of borehole bending. Drilling tools rotating changes the flow field distribution of annular width gap, increase annular drilling fluid turbulence scale, and make the cuttings in bed surface stir. With the drilling tools rotating direction migration, bring cuttings to high velocity area of annular and increase the probability of the cuttings are carried to wellhead by return drilling fluid. Thus, the study on influences of the drilling tools rotating to cuttings removal in building inclined section has an important meaning for carrying cuttings theory and engineering practice.Analyzing the annulus fluid mechanics in the paper, the circumferential velocity distribution model of annulus flow field considering drillstring rotation was established. The force acting on the cuttings was analyzed by liquid-solid two phase flow theory, According to startup condition and suspension condition of cutting transport The critical startup velocity model of cuttings particles flipping, climbing, slippage and suspension. The influence of drilling tools rotating to cuttings critical startup speed is analyzed. Through calculating, we find that: At 150RPM,the biggest effect rate to the wide annular tolerance is 38%, to the narrow annular tolerance is 47%;at last,in accordance with the critical toggle speed model of rock debris ,with the effect of drill rotating function to rock debris start and migration law at different eccentric annulus,describe the cuttings motion state of different position in annular, and a new method of evaluate borehole cleaning effect is proposed.

Related Dissertations

  1. Study on Aerostatic Stability of Long-span Suspension Bridges,U448.25
  2. Simulation and Safety Evaluation of Fragments Impacting Shielded Explosive,TJ510
  3. Dynamics and Stability Analysis for Multi-Span Pipes Conveying Fluid,TB126
  4. Study on Smoke Flow Characters and Management in Subway Station Fire,U231.96
  5. Study on Dynamic Analysis and Wind-Induced Aerodynamic Instability for Membrane Structures,TU38
  6. Numerical Study on Air and Smoke Flow Characteristics in Subway Space,U231.96
  7. Numerical Simulation of Ventilation Control Technology in Road Tunnel Fires,U453.5
  8. Town underwater tunnel ventilation and disaster prevention operations research,U453.5
  9. Study on the Flow Characteristics of the Thickening-colloid in Pipeline,TD752
  10. Design and Calculation of Hydrodynamic Parameters in Air Drilling,TE242.6
  11. An Investigation on Electrochemical Corrosion Behaviors of Steels,TG172
  12. Catwalk Suspension Static Stability of Wind,U441.2
  13. Liquid Sloshing and Transverse Stability Analysis of Tank Truck with Arbitrary Proportional Liquid,O353.4
  14. Study on Fluid Elastic Instability of Tube Arrays in Heat Exchangers,TB657.5
  15. Span bridge flutter stability and reliability of gas static,U441.3
  16. Multilayer subway station ventilation and smoke control and safety assessment,U231.4
  17. Process Optimization and Economic Analysis of Slurry Pipeline Transportation,F252
  18. Numerical Simulation Study on Flow Field and Rock-Breaking for Self-Propelled Nozzle Applied in Hydraulic Deep Penetration,TE257.1
  19. Analysis on Dynamic Characteristic and Flow Induced Vibration of Heat Exchanger Tube Bundles,TK172.4
  20. Experiment research of the horizontal axis of cylindrical spiral flow hydraulic characteristics and Solid Particles suspended,TV142.1
  21. Study on the Liquid Supply and Sealing of Immersion Unit for Immersion Lithography,TN305.7

CLC: > Industrial Technology > Oil and gas industry > Drilling engineering > Drilling of production safety and the complexity of the situation
© 2012 www.DissertationTopic.Net  Mobile