Dissertation > Excellent graduate degree dissertation topics show

Tiny distance measurement method and implementation

Author: KangGuiZhen
Tutor: HuangZiQiang
School: University of Electronic Science and Technology
Course: Optical Engineering
Keywords: LCD gap film thickness CCD ARM
CLC: TP274
Type: Master's thesis
Year: 2009
Downloads: 196
Quote: 0
Read: Download Dissertation

Abstract


The gap of the LCD is the thickness of the LC. In the process of manufacture, improper operation will cause LCD gap asymmetry, and LCD will not achieve the specifically display mode. So it is very important to measure the gap of LCD accurately.Of course, in order to get the thickness of the LCD, the operator must measure the thickness of the IP and ITO film. Actually, the exact thickness measurement of film is very important for the technics control, material analysis and the relationship between implement and material.A new thickness measurement technology of LCD gap and film was introduced in the paper. Being different from the mostly laser sourse, the method used the white light as the light source. The spectrum equipment was used to measure the reflected spectrum, reflected rato etc. By anglicizing the relationship between wavelength and the reflective light intense; the operator can obtain LCD gap, film thickness and the refractive index of the film. Being different from other methods, it can measure the thickness of the sigle dot quickly and expediently.When the incident angle is not 0, and the refractive index of the film is unknown, the operator must get the reflective spectrum. However, the current equipment can only measure the reflective spectrum when the incident angle is 0.The hardware of the spectrum equipment was disigned, which laied a solid foundation of the film measurement. The focus of this system was to design the hardware of linear-CCD data sampling system based on ARM processor, and the related software to support the system. The system was composed of three modules. In order to produce CCD driving pulses, the CCD driver module was used to program the ARM. After preprocessing, the output signals were transmitted into ADC module, in which they were converted into digital signals. And then they were processed in ARM processing module. Finally, the debug process and the compiled system were demonstrated.

Related Dissertations

  1. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  2. Research on Temperature Measurement Technique Based on CCD Image Sensor,TH811
  3. The Electric Power Steering System,U463.4
  4. Research on the Optimization of Laser Triangulation Device,TH744.5
  5. Development of Experimental Robot Control System Based on ARM,TP242.6
  6. Data Collecting and Processing of Multi-Linear-CCD Visual Measuring System,TP274.2
  7. Research on Visual Servo System of Mechanical ARM,TP242.6
  8. Research on Software of TFT-LCD Testing Equipment Based on ARM,TN873.93
  9. The Combined Effect of Several Environmental Factor on Fertilization, Hatching and Juvenile Growth of Nile Tilapia,S917.4
  10. Signal Acquisition and Processing Platform Design and Implementation of Trawl Sonar System,S951.2
  11. Study of An Embedded Chinese Medical Therapeutic Apparatus,R197.39
  12. Borehole imaging device based on embedded systems research,P634.3
  13. Remote areas, distribution transformer monitoring system design theft,TM421
  14. Source Control System Liquid Cooling,TP273
  15. Study of the Mechanical Strcture of a De-Icing Robot for 220kV Transmission Lines,TP242
  16. Based on the embedded Web technology Research and Implementation of Dynamic Strain Gauge,TP368.1
  17. 3G network based embedded platform design and implementation of video capture,TP274.2
  18. Development of Film Thickness and Experiments Study on Lubrication in Cold Rolling,TG335.12
  19. The Research of the Embedded Mine Dynamic Weighting for Data Acquisition Platform Based on ARM-Linux,TP274.2
  20. Intelligent Cleaning Robot Control System Design Based on the ARM,TP242
  21. Study and Design on a New Vehicle Traveling Data Recorder,U463.7

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system
© 2012 www.DissertationTopic.Net  Mobile