Dissertation > Excellent graduate degree dissertation topics show

Preparation and Characterization of Waterborne Acrylate Resin Through the Phase-Inversion Method

Author: CaoYiChen
Tutor: YouBo
School: Fudan University
Course: Materials Physics and Chemistry
Keywords: waterbome acrylate resin phase inversion hollow spheres
CLC: TQ323.42
Type: Master's thesis
Year: 2011
Downloads: 167
Quote: 2
Read: Download Dissertation

Abstract


In recent years, with the stricter requirements of environment protection and volatile organic compounds (VOCs), research and application of high performance waterborne resins become hotspot in coatings, adhesives and inks industry. CPP/polyacryaltes composite polymers by radical polymerization were prepared and waterborne hollow microspheres were obtained by phase-inversion method as well as waterborne acrylate resins for untreated polypropylene (PP) substrate. The forming mechanism of polymer hollow microspheres and the performance of waterborne resins were investigated. The adhesion strength of waterborne resin on PP was good enough to replace traditional solvent-based resins to protect the surface of plastics. The detailed content is listed as follows:(1) A novel and facile method to fabricate hollow polymer microspheres based on phase-inversion method was presented. In this approach, when hydrophobic chlorinated polypropylene was grafted by methyl methacrylate, butyl acrylate and acrylic acid via free radical polymerization and then neutralized by triethylamine and gradually diluted by deionized water, phase-inversion happened, directly yielding hollow polymer microsphere dispersion. The results of the experiments showed that the phase inversion of CPP and polyacrylate which introducing internal hydrophilic microareas, and the dissolution of internal hydrophilic areas after phase inversion was the main reason that the hollow structures generated. The content of monomer AA was decisive to the incomplete and complete phase separation of the resins, therefore to the morphology of microspheres. When the amount of AA was low, a porous structure could be obtained; while the amount of AA was high, hollow microspheres could be obtained.(2) A way to develop waterborne CPP/polyacrylate resins was illustrated by polymerization of monomers in the presence of CPP as well as afterwards neutralization with amine and phase inversion. The copolymerization monomers were methyl methacrylate, n-butyl acrylate and acrylic acid. Optical microscope, SEM, XPS and contact angle measuring device was used to characterize the influence of CPP and cosolvent to the stability of the resins, and the surface energy and adhesion of coatings on PP substrate. The results showed that the unsuitable cosolvent would cause the separation out of CPP and reduce the adhesion. The composition of waterbome resins and cosolvent types had impact on the surface energy of coatings and adhesion. Coatings with low surface energy had better adhesion on PP substrate.

Related Dissertations

  1. Hydrothermal Synthesis of Oxide Hollow Spheres,TB383.4
  2. Preparation of Different Morphological Silica Nanoparticles Via Polymer Template,TB383.1
  3. The Mechanism Study on the Effect of Additives on the Structure of Reverse Osmosis Support Membrane,TB383.2
  4. Fabrication of Anti-fouling Poly （Vinylidene Fluoride） Microfiltration Membrane and Study on the Performance,TB383.2
  5. The Preparation and Characterization of Oxygen Separation for Membranes Originated from LaCoO3,TB383.2
  6. The Study on Synthesis of Phenylpiperazine Derivative and Preparation of Composite Nanofiltration Membranes,TB383.2
  7. Preparation Method Study of Acetyl Cellulose Aqueous Dispersion,R944
  8. Preparation and Investigation of Polysulfone Diaphragms for Alkaline Water Electrolysis,TB383.2
  9. Studies on Preparation and Performance of Cellulose Triacetate Forward Osmosis Membrane,TQ028.8
  10. Study on Hybrid Ziegler-Natta Catalyst for Ethylene Polymerization,TQ325.12
  11. Preparation and Electrochemical Study on the Three-dimensionally Conductive Cathode Materials,TM912
  12. Preparation and Modification of Polyvinylidene Fluoride (PVDF) Microfiltration Membrane,TQ320.721
  13. A Study on Novel Composite Diaphragms for Alkaline Water Electrolysis,TQ116.21
  14. Synthesis of Amphiphilic Copolymers Based on MMA and Their Effects on the Hydrophilization of PVDF Porous Membrane,O631.3
  15. Phase Inversion tapered tubular anode-supported solid oxide fuel cell and its properties,TM911.4
  16. Forward Osmosis Membrane and Its Preliminary performance salt water,TQ085.4
  17. Fabrication of PVA-PES Asymmetric Membranes for Prevaporative Dehydration of Ethanol,TQ223.122
  18. Preparation and Characterization of PVDF/PAN/nano-Clay Hybrid Hollow Fiber UF Membrane,TB383.2
  19. Synthesis of PVDF-Based Amphiphilic Copolymers and Their Modification Effects for PVDF Micro/Ultrafiltration Membrane,TB383.2
  20. Preparation of PVC heat NIPS microporous membrane and its Structure Control,TQ028.8
  21. Influences of Thermal Treatment and Shearing on Phase Morphology and Crystallization Behavior of Impact Polypropylene Copolymer,TQ325.14

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Polycondensation resin and plastic > Polyester resins and plastic materials > Unsaturated polyester
© 2012 www.DissertationTopic.Net  Mobile