Dissertation > Excellent graduate degree dissertation topics show

Study on Porosity and Process Optimization of Hypereutectic Al-Si Alloy Die Casting

Author: ZhaoZuo
Tutor: DingWenJiang；ZengXiaoQin
School: Shanghai Jiaotong University
Course: Materials Science
Keywords: die casting parameters R14 aluminum allay air-conditioning compressor cylinder the changing rate of density porosity modifying agent numerical simulation filling defect predict
CLC: TG249.2
Type: Master's thesis
Year: 2009
Downloads: 161
Quote: 0
Read: Download Dissertation

Abstract


In this contribution, the effects of five important process parameters, metal temperature, casting pressure, fast shot speed, fast shot set point on the properties of die casting R14 aluminum alloy air-conditioning compressor cylinder were investigated by the method of measuring the density of as-cast and heat treated casting、analyzing microstructure and testing the tensile properties.Numerical simulation is also used to describe the flow and temperature distribution at the different metal temperature, fast shot speed and fast shot set point in the platform of AnyCastingTM using Finite difference method.The result showed that higher metal temperature and fast shot speed increase the amount of the porosity; an increase in fast shot set point decrease the amount of the porosity; an increase in pressure increase the porosity first and then decrease. An increase in metal temperature decrease the UTS and elongation; an increase in fast shot speed and fast shot set point increase the UTS and elongation and the decrease; an increase in casting pressure increase the UTS and elongation. The optimum combination of modifying agent, melt temperature, casting pressure, fast shot speed and fast shot set point for generating the lowest porosity were HGPB-1 modifying agent, 700℃-720℃, 104Mpa, 1.5m/s, 320mm, respectively.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  4. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  19. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  20. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  21. Recycled aggregate semi- rigid concrete preparation and molding of test,TU528

CLC: > Industrial Technology > Metallurgy and Metal Craft > Casting > Special Casting > Pressure die casting
© 2012 www.DissertationTopic.Net  Mobile