Dissertation > Excellent graduate degree dissertation topics show

Research of the Lightning Protective Gap in 110kV Transmission Lines of Oil Field

Author: FuQiang
Tutor: YaoJianHong
School: Northeast University of Petroleum
Course: Power Electronics and Power Drives
Keywords: protective gap insulator chain flashover finite element analysis electromagnetic transient analysis
CLC: TM863
Type: Master's thesis
Year: 2011
Downloads: 74
Quote: 0
Read: Download Dissertation

Abstract


In actual operation of the 110kV transmission lines of oil field, the main factor causing the operational failure of lines is lightning. As many factors, the effect of the traditional methods of lightning protection are all not ideal. In this paper a new type of lightning protective gap is designed, and its effect can be proved to be the standard we need.The new type of protective gap is designed based on theory of insulation coordination in power system; its structure is simple and can be conveniently maintained. This device can be installed on both sides of insulator chain to protect the insulator chain. When the lines is struck by lightning, the gap can strike the arc and flashover before the insulator chain to prevent the insulator chain from being burned up; It also has the use of voltage-sharing, can improve the distribute of the voltage on the insulator chain to reduce the possibility of the producing of electric corona.For the installation scheme of protective gap, the reliable can be evaluated scientifically by ATP-EMTP, not as usual that the installation scheme would be determined only by the operation experience and data of the lines. The influence of several factors such as the position of lightning, volt-second characteristic and lightning flashover should be combined, safety and economy should be fully considered, and then the placing density can be determined.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  8. Sham hose drum drive means and hydraulic system of the structure,TE973
  9. Study of the Tunnelling Laneway Drilling and Anchor Rope Installation Device,TD353
  10. Study on Mechanical Property of Plug-pin Steel Tube Scaffold Platform,U673.3
  11. Virtual Prototype Realizing and Performance Research of Longitudinal Roadheader,TD421.5
  12. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  13. The Research of Power Grid Pollution Flashover in the Yellow River Delta Shengli Offshore Area,TM852
  14. Multi-objective Optimization Design of Vertical Machining Center,TG659
  15. Study on Deformation and Load Characteristics of the Rigid Net Grid-Small Pile Group Composite Foundation under Rectangular Footings,TU473.1
  16. A New Passive Fault Indicator for Locating Insulator Flashover,TM73
  17. Research of Cymbal Piezoelectric Generator Performance,TM919
  18. The Influence of Residual Stress on the Stress Distribution in Vessel Wall after the Deployment of Vessel Stent,R312
  19. Residual Strength Analysis of Structures with Multiple Site Damage Based on Crack Tip Opening Angel Criterion,O346.1
  20. Study on Dynamics and Stability of Scarf-repaired Composite Laminates,V229.7
  21. Large-scale structure of spiral bevel gear milling machine static and dynamic performance analysis,TG547

CLC: > Industrial Technology > Electrotechnical > High Voltage Engineering > Overvoltage and Its Protection > Atmospheric over-voltage and its protection
© 2012 www.DissertationTopic.Net  Mobile