Dissertation > Excellent graduate degree dissertation topics show

Research on Identification and Estimation Method of Network Parameter Errors Considering Network Division

Author: SongLinTao
Tutor: YanWei
School: Chongqing University
Course: Electrical Engineering
Keywords: Topology Division Parameter Identification Parameter Estimation Lagrange Identification Approach Weight Function
CLC: TM711
Type: Master's thesis
Year: 2011
Downloads: 93
Quote: 0
Read: Download Dissertation

Abstract


State estimation of power system is a very important part of energy management system. Its result directly affects the intelligent analysis and decision-making of power dispatching. In practical opration powe system, it is difficult to obtain correct real-time measurement data and network parameters, which musr cause the result of state estimation incorrect. Therefore, it is important to study erroneous parameters along with bad telemetry measurements which is referred to as bad data for short. Existing methods can not identify and estimate multiply bad data effectively. To solve this problem, an identification and estimation method of network parameter errors considering network division is presented. The main contents are as follows.Firstly, a network topology dvision method based on minimum degree search is proposed. The network is divided into radial network, simple meshed network and complex meshed network to form many independent subareas by network topology searching. And the information of branchs, nods and the public boundary nod in every subarea are established automaticly, thus an important foundation for the divisional realization of parameter identification and estimation is laid.Secondly, a divisional network parameter identification approach is presented. Combining network division with Lagrange identification approach, Lagrange approach is carried out to identify bad data in each subarea. The interaction of bad data between different subareas can be avoided by the proposed method. When multiply bad data exist in different subareas, all bad data can be identified simultaneously. Thus, the identification of multiply bad data of many subareas in the same network is realized efficiently.Lastly, a function weighted least squares augmented method is proposed. If a parameter is identified as erroneous in each subarea, weighted least squares augmented method is used to estimate its value. The weight of least squares state estimation is corrected dynamically via the use of weight function, so the effect of bad data during parameter estimation is inhibited. If there are more than one parameter errors in a subarea, the parameter-residual sensitivity parameter estimation method is carried out again to estimate all of them. The interaction of multiply parameter errors in the same subarea is avoided, thus, the accuracy of estimating erroneous parameter is greatly improved. The proposed method combine network division and Lagrange approach and weight function estimation method, the effectiveness of identifying multiply bad data and the accuracy of estimating erroneous parameter are improved, thus it has great practical value. The validity of the proposed method is verified by the simulations on the IEEE 30-bus system and IEEE 118-bus system.

Related Dissertations

  1. Research on Vector Control System of Induction Motor Based on DSP,TM346
  2. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  3. Transmission Network Planning Program Evaluation Based on LCC Theory,TM715
  4. Modal Parameter Identification and Noise Reduction of Flood Discharge Structure Vibration Response Based on Modern Time-frequency Method,TV312
  5. PET radioactive concentration and robust reconstruction of kinetic parameters,R811
  6. Study on Excitation and Speed Control System Modeling and Visualization Parameter Identification Software,TM743
  7. Study of Dynamic Equivalent of Power System Based on Parameter Identification,TM712
  8. DNA Genetic Algorithms and Applications in Chemical Processes,TP18
  9. Research on Direct Sequence Spread Spectrum Signal Detection and Parameter Estimation,TN914.42
  10. The Dynamic Analysis and Predictive Study of the Forest Resource Structure Adjustment,F326.2
  11. Experimental Modal Analysis on Precision Machine Tool,TG659
  12. Research on Temperature Prediction Model of Molten Steel in LF,TF769
  13. The Rearch on the Technology of MELPe Speech Coder,TN912.3
  14. Research on Channel Estimation Algorithm Based on Fractional Fourier Transform,TN911.23
  15. Research on the Paired Carrier Multiple Access Technique in Satellite Communication Systems,TN927.23
  16. The Research on Signal Detection and Parameter Estimation for OFDM System with Antenna Array,TN919.3
  17. Multi-polarization SAR filtering classification technology research and SAR image processing software system,TN958
  18. Signal Recognition and Parameter Estimation for Multi-carrier Systems in Shortwave Communications,TN919.3
  19. Study and Realization of the Key Techniques of HF/VHF Communication Signal Analysis,TN911.6
  20. Research on DOA Estimation and Tracking Approach Based on Monte Carol Method,TN911.7

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Theory and Analysis > Network analysis,power system analysis
© 2012 www.DissertationTopic.Net  Mobile