Dissertation > Excellent graduate degree dissertation topics show

Study for Natural Convection of the LED Street Lamp’s Heat Sink

Author: ChenQiYong
Tutor: HeChuan
School: Chongqing University
Course: Power Engineering and Engineering Thermophysics
Keywords: LED Street light heat dissipation numerical simulation natural convection a large space
CLC: TM923.5
Type: Master's thesis
Year: 2011
Downloads: 251
Quote: 0
Read: Download Dissertation

Abstract


At present, the environmental and development issues become the core of the contemporary world issues. In the context of energy-saving emission reduction, green economy has become a more sustainable new industry. LED light source as a revolutionary new energy-saving environmental protection is the concern of the countries and regions of the world’s strategic industries. If the heat sink of high power LED Street lamp is not good, will cause the LED luminous efficiency low, life expectancy shortened, LED chips, phosphor, package have serious changes the optical properties of materials, thermal is one of the promoting LED lighting key technologies need to be addressed.This article experimentally analyzed the natural convection cooling performance on the current mainstream of high power LED Street lamp-aluminum radiator. And established a three-dimensional physical modeling using CFD software, using whole discrete, the whole solution in radiator in space by natural convective heat transfer process are coupled numerical calculation, received the radiator heat balance around the stable temperature and cooling air flow of vector field. Numerical results and experimental results within 2% error, it ensures the reliability of the numerical calculation.Research found that the radiator in the large space in natural convection, the cold air around the radiator heated and moved up by the action of the buoyancy, the supplementary cold air came in, constantly cycle to heat away in the process, above the radiator forms a barrier area, hinder has around air entered radiator rib tablets middle of slot road, making rib tablets can not be full of natural convection. This paper focuses on the heat sink temperature and radiator cooling air flow characteristics around, have proposed a design of permeable structures in the middle and the bottom surface of substrate at both ends of the radiator slot. Change the air flow direction of disturbed flow cooling radiator, you can make the vertical flow of air in the middle of radiator, not only can damage the barrier region above the radiator, also increase the speed of air flow around the radiator, increasing the amount of cooling air circulation. In the same 50W power, the bottom surface of substrate of the LED lights through the open-type than the original model of the maximum temperature of 5 degrees lower, the average heat transfer coefficient of fin from 7.2W/(m~2·K) increased to 8.5 W/(m~2·K), significantly increased the high-power LED street lamp radiator cooling capacity.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Electrotechnical > Electrification,electrical energy application > Electrical lighting > The lights of a variety of purposes
© 2012 www.DissertationTopic.Net  Mobile