Dissertation > Excellent graduate degree dissertation topics show

Study on the Application of Fuzzy Control in Aggregate-Weighing System for Asphalt Mixing Plant

Author: QinHongLang
Tutor: ChenXinXuan
School: Chang'an University
Course: Mechanical and Electronic Engineering
Keywords: Asphalt mixing plant Aggregate weighing system Fuzzy Control PID controller Simulation
CLC: U415.5
Type: Master's thesis
Year: 2009
Downloads: 84
Quote: 3
Read: Download Dissertation

Abstract


Level of the quality of the asphalt pavement , is closely related to the use of performance quality and performance of asphalt mixture of raw materials , mix gradation and construction control factors , including the control of the production mix is an important factor affecting the asphalt mixture production mix of factors in addition to the stirring device structure , the most important is the accuracy of the weighing of the weighing system , the speed control. Asphalt mixing plant aggregate weighing system is an important issue , has a practical significance . In this paper, based on the research of asphalt mixing equipment Aggregate weighing system structure and working principle of the control of the speed and accuracy of the weighing of the weighing system . The weighing system is nonlinear transient system , the system is equivalent to the second-order system , derived a mathematical model of the weighing process , into a dynamic weighing issues . Experimental analysis of the system , draw the output of the system is an oscillation process , so the correction system . General correction method does not apply to the system , tracking compensation , dynamic correction of the weighing system in the weighing process , always keep the best of the second-order system , and come to the real signal . Problems exist for general mixing equipment weighing system , on the basis of the analysis of the theory of fuzzy control and PID control , fuzzy control and PID control strategy introduced in the weighing system . And PID parameters self - adjusting fuzzy controller weighing system made ??some exploration , through MATLAB simulation software to design a fuzzy controller . The entire weighing system using MATLAB simulation software simulation, PID control system simulation and PID parameters self-tuning fuzzy control system simulation comparison , draw system , PID parameters self-tuning fuzzy control can improve the dynamic characteristics of the system and stable performance , using this method can effectively control the double solenoid valve , thereby greatly improving the accuracy of the weighing of the weighing system .

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  11. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  12. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  13. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  14. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  15. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  16. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  17. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  18. Numerical Simulation of Biomass Direct Reburning,TK16
  19. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  20. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  21. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173

CLC: > Transportation > Road transport > Road works > Road construction > Construction machinery and equipment
© 2012 www.DissertationTopic.Net  Mobile