Dissertation > Excellent graduate degree dissertation topics show

Rod longitudinal vibration of Linear Ultrasonic Motor Based Research

Author: LeiXiangHong
Tutor: LiWei
School: China Ship Research Institute
Course: Artillery , automatic weapons and ammunition Engineering
Keywords: Linear ultrasonic motor Piezoelectric ceramics Operation modes frequency tracking Impedance angle
CLC: TM359.4
Type: Master's thesis
Year: 2011
Downloads: 75
Quote: 1
Read: Download Dissertation

Abstract


This project is supported by the National Science Foundation (No. 50807048).The ultrasonic motor (USM) is a kind of new driver micromotor,that transforms the mechanical vibration of stator at ultrasonic range to macro motion of its rotor or silder applying the converse piezoelectric effect of piezoelectric ceramics and friction action.A linear ultrasonic motor (LUM) has a special advantage in the drive and control of the precise devices, it has a broad application prospect in the high-tech fields, such as precise instrument and device, medical field, astronautics, robotics, and so on.This thesis aims at the realization of the LUM based on longitudinal vibrate mode of pole, and studies on its drive mechanism, finite element analysis, driving device, designing and experiment. The following are the chief content of this thesis:1、The definition and characteristics of the LUM are systematically introduced, the current research at home and abroad are studied and the purport and application prospect of LUM are pointed out. Discussed the characteristics of the piezoelectric ceramics and studied the operational principle of LUM.2、The project studied the mechanism of the linear ultrasonic motor based on longitudinal vibrate mode of pole.From a sequence input voltages signals, the excitation process of operating vibration modes is explained. Oval sport track of driving points is deduced in theory. Build up the vibrate mode of stator based on finite element method through analyzing its structure. Analyzed the structure parameter of stator applying finite element software, finding a way which can control the resonance frequencies, and finally turning them to be the same one.3、A new driver of the USM is designed according to characters of the drive of the USM, and discussed the operation of each part respectively. A feedback controlling circuit based on characteristic of impedance angle is designed according to working characters and structure of the linear ultrasonic motor.4、According to the working characters of ultrasonic motor, two kinds of frequency tracking technique of USM that based on the voltage produced in the isolate electrode and based on the phase difference between the driving voltage and electric current were Intensive studied, also the operation, characteristics and function of two kinds of tracking technique were analyzed and compared.5、Carried on an experiment research. A sample of the linear ultrasonic motor and driving and controlling power are manufactured. Carried on a related functional experiment to the linear ultrasonic motor and power, results show that the motor can stabilize working, and the controller can maintain the status of USM. Carried on an experiment research about two kinds of controlling method, validated the correctness of conclusion.

Related Dissertations

  1. Plumbing heating system of induction heating power,TM924
  2. Ultrasonic vibration system thermal modal casting and broadband frequency tracking realization and Experimental Research,O426.9
  3. Study of Ultrasonic Power Supply Based on Genetic Algorithm for Al Casting-Rolling,TP18
  4. Design and Research of Ultrasonic Impacting Equipment for Relieving Welding Residual Stress,TG404
  5. The Application and Research of Neural Network in Power System Harmonics Analysis,TM711
  6. Study and Realization of Wetness Measurement System for Wet Steam,TP274
  7. Time-Scaling Adptive Notch Filter Based Dynamic Phasor Estimator for Power Systems,TN713
  8. Agricultural film crew electromagnetic heating system development,TQ320.5
  9. DSP-based ultrasonic scalpel of power supply control circuit,TP368.1
  10. The Research of an Ultrasonic Generator Based on the Symmetric Automatic Steady Speed Control Method,TN86
  11. Research on High Frequency Induction Heating Power Supply Base on DPLL,TM924
  12. Servo System Design for Photocell Holder,TM914
  13. The Research and Development of Pulse Synchronization Supersonic Wave Treatment Equipment,TH789
  14. The Design and Realization of Wet Steam Humidity Measurement Sensor and Control System,TP212
  15. Principles and System of Ultrasonic Polishing Study,TG663
  16. Ultrasonic power pulse characteristics and Experimental Research,TG663
  17. Design Research on Ultrasonic Power Used in Aluminum Alloy Casting Process,TN86
  18. Research of Ultra-audio-frequency Induction Heating Power Based on TMS320F2812,TM924
  19. Research on Ultrasonic Motor Driver Based on PSoC,TM359.9
  20. Research on Tip Clearance Measurement with Capacitance-FM Sensor,V235.11
  21. Automatic Temperature-controlled Ultrasonic Extraction Instrument Development,R318.6

CLC: > Industrial Technology > Electrotechnical > Motor > A special motor > Linear motor
© 2012 www.DissertationTopic.Net  Mobile