Dissertation > Excellent graduate degree dissertation topics show

Numerical Investigation on the Improvement of the Thermal Everionment in the Spraying Coating Workingspace

Author: WangXiFan
Tutor: ZhouZuoMin
School: Central South University
Course: Power Engineering
Keywords: refrigeration airflow organization finite-element method spraying coating
CLC: TU831.8
Type: Master's thesis
Year: 2011
Downloads: 13
Quote: 0
Read: Download Dissertation

Abstract


Thermal spraying coating is a novel technology used for surface hardening, which is operated in an isolate chamber filled with the inert gas at the constant pressure. The chamber should be firstly vacuumed, leading to the intensive heat production. The heat should be removed in time to avoid the malfunction of the spraying coating equipment. In this paper, a new air-conditioning system was proposed and studied to provide a good working condition.By considering the limitation of the working space, the outdoor circulation is used to remove the indoor heat. The evaporator of air conditioner is equipped in the air duct. Thus, the evaporator is redesigned to meet the operation requirement and reduce its size. The physical model and mathematical model are developed, and AIRPAK software is used to simulate the flow field and temperature field. The position and size of the vents for delivering air and returning air are optimized that can immediately remove the indoor heat produced during the working process. The negative pressure may occur in the air duct during the operation that requires the higher strength of the duct. The physical model and mathematical model are also developed to the study the duct structure and envelope frame. ANSYS software is used to calculate the intension and deflection of the duct. The reasonable configurations of air duct and envelop frame are determined.According to the above results, a new air-conditioning system is designed and built up. Based on the on-site observation and measurement, it is found that the system runs well and provides a good working condition for the thermal spraying coating.This study is of great significance for the development and application of the thermal spraying coating technology.

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  4. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  5. The Development of Linear Motor Cooling Controllers Based on DSP,TM359.4
  6. Study of Modal Characteristics of a Car Body-in-White,U463.82
  7. Studies on Wind-induced Dynamic Response and Vibration Control of Guyed Cat-head Transmission Tower-line System,TM753
  8. Decision Design and Research on Moving-iron Linear Oscillatory Motor with Two Separated Stators,TM359.4
  9. Sensitivity Analysis on Fatigue Reliability of a Turbine Disk Using Finite Element Method,V232.3
  10. Research narrower than the opening Kita highly optimized root,TU347
  11. Strength Analysis and Parameter Optimization of Single Channel Drum Dryer,TK173
  12. Structural Strength Analysis of Rotary Vane Dryer,TK173
  13. Study on Dynamic Space Structure of Groundwater on Land Use,P641.8
  14. Fatigue Analysis and Life Prediction of a Loader’s Drive Axle Housing,TH243
  15. Principle and Experiment Research of Road Simulation Test Stand for Vehicle Parts,U467.3
  16. The Fatigue Life Study of a Car Body Based on the Random Vibration,U463.82
  17. Fatigue Reliability Sensitivity Analysis of High Speed Rail Axle,U270.3
  18. Research on Car Frontal Impact Simulation and Crashworthiness Analysis,U467.14
  19. Computer Simulation of Weak Feedback Fiber Amplifier,TN722
  20. Electrical Impedance Tomography numerical solution of the problem in some studies,O441.4
  21. Solar adsorption chiller operating characteristics simulation and control system development,TB651

CLC: > Industrial Technology > Building Science > Housing construction equipment > Air-conditioning, heating, ventilation,and its equipment > Air-conditioning > A variety of housing air-conditioning
© 2012 www.DissertationTopic.Net  Mobile