Dissertation > Excellent graduate degree dissertation topics show

Steel - concrete composite truss ear plate node Experimental study and theoretical analysis

Author: OuChangGui
Tutor: WangHaiBo；ChenBoWang
School: Central South University
Course: Architecture and Civil Engineering
Keywords: steel-concrete composite truss ear-plate node experimental research non-linear finite element analysis working performance
CLC: TU317
Type: Master's thesis
Year: 2011
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


Steel-concrete composite truss structure is a new type of structure that is consist of the steel-concrete composite chords and the steal web member. The node of steel-concrete composite truss studied in this thesis is not only the assembly areas where the upper chord and the web member meet and interact with each other, but also the core point of force transferring in this structure. The mechanical performance of the node exerts great influences on the working performace of truss structure. In order to study the working performance of ear-plate node specimens under horizontal loading, the static loading test and general software ABAQUS are employed. The following are the researching contents and major achievements:1) Two experiments on the ear-plate node specimens that ratios one to three are carried out during the process. The working performance of composite joints are analyzed according to the strain and displacement as well as the failure characteristics of steel leg yielding and concrete cracking during the experiment. Experiment has indicated that the carrying capacity of the node specimen is good. However, buckling failure occurred at the steel legs in the two experienment, so the bearing capacity of ear-plate depends mainly upon strength and sectional properties of steel legs..2) General software ABAQUS is employed to do numerical simulation on the ear-plate node. And then the data are compared with that worked out by the experiment. By doing so, the accuracy of the software ABAQUS and brief design of the node is tested. It turns out that this model is reliable in calculation and can reflect the real working state of the node of steel-concrete composite truss. Detailed analysis of the data shows that the malfunction of the node is because of chord crack and steel legs buckling. Therefore, the strength of chord、and the strength and sectional properties of steel legs exerts great influence on the ultimate bearing capacity of the node. At the same time, the mechanical performance of PBL is analyzed.3) Parameter analysis is carried out to composite truss ear-plate node with different intensity of steel-concrete, thickness of steel legs and intensifies and shape of shear connector. And the influence of different parameters to the maximum displacement and the maximum stress of the node are made clear. Research shows that bearing capacity of the ear-plate node can be obviously improved by upgrading the quality of steel-concrete and increasing the thickness of steel legs. The change of reinforcement ratio of Longitudinal and stirrup ones as well as the size and intensity of PBL have little influences on the ultimate bearing capacity of the node.

Related Dissertations

  1. The Realization of Coal Liquefaction in the Continum Model System and the Experimental Research of Coal Liquefaction,TQ529.1
  2. Outward Bound to the introduction of the experimental study of junior high school students sunshine sports,G633.96
  3. Research on Relation between Profession Values, Teaching Efficiency and Working Performance of Primary and Secondary School Teachers and Management Countermeasures,G635.1
  4. Dynamic Performance Simulation and Experimental Research of Wheel Loader Hydraulic System,TH243
  5. A Study on the Effectiveness of Lead-in in Middle School English Teaching,G633.41
  6. Experimental Study on Natural Convection of Cold Water Near the Maximum Density in Horizontal Annulus and Square Cavity,TK124
  7. Analysis on Composite Column with Concrete Filled Thin-walled Steel Tube under Strength,TU398.9
  8. The Experimental Research on Ground Heat Exchanger Buried in Beach,TU831.6
  9. Experimental Research on Concrete-filled Squared Tubular Column to H-shape Steel Beam Connection,TU398.9
  10. Nonlinear Finite Analysis and Seismic Behavior Study on Short-Limbed Shear Wall Structure,TU398.2
  11. Test and analysis of Stud Connectors in Composite Structure,TU398.9
  12. Research on Cooperative Working Performance of Strip Foundation and Water-Proof Slab,TU470.3
  13. Analysis on the Mechanical Behavior of Steel Plate-Concrete Composite Beam,TU398.9
  14. Hydraulic excavator to optimize the performance of research and operations,TU621
  15. 究 Experimental Study on the Mechanical Property,TU398.9
  16. Study on Performances of Reinforced Concrete Beam with Flexural Cracks Filled Under Loading,TU375.1
  17. The Experimental Research on Useing Situational Teaching Model in Primary PE,G623.8
  18. Experimental Research on Anti-corrosion Measures of High Performance Concrete in Saline-lake Environment,TU528
  19. Practicality of Physical Education Vocational Vocational Study,G807.4
  20. Behavior Study on Shear-Resistance of Web-steel Compound Wall,TU392.1
  21. Nonlinear Finite Element Analysis of Hybrid FRP Reinforcement Concrete Continuous Beam,TU377

CLC: > Industrial Technology > Building Science > Building structure > Structure theory to calculate > Structural Testing and Inspection
© 2012 www.DissertationTopic.Net  Mobile