Dissertation > Excellent graduate degree dissertation topics show

Department of anchor carbon fiber reinforced concrete frame in indirect Experimental study on mechanical properties of joints and finite element analysis

Author: ZhouYiBai
Tutor: HeXueJun
School: Central South University
Course: Civil Engineering
Keywords: frame joints lock-anchored Carbon Fiber Reinforced Polymer (CFRP) sheets strengthened indirectly finite element analysis the shear capacity of joint core
CLC: TU311
Type: Master's thesis
Year: 2011
Downloads: 29
Quote: 2
Read: Download Dissertation

Abstract


Beam-column joints are very important element in reinforced concrete (RC) frame structures, destruction of the joints will lead to the collapse of the whole structure. Current researches on retrofitting technology of joints mainly focus on the plane frame joint cores strengthened with carbon fiber-reinforced polymer (CFRP) directly, which are not easily to be applied to practical projects. The method of internal joints strengthened with the beam-column-end-CFRP indirectly is more suitable for practical works and also can improve the bearing capacity of the joints with orthogonal slabs. Supported by Hunan Provincial Natural Science Foundation of China and Provincial Science and Technology Program, the force performance of four joints strengthened with the beam-column-end-CFRP indirectly was discussed by experimental study and numerical analysis. And the working mechanism and design formula of frame joints with lock-anchored CFRP sheets were also proposed. The main work and research results are as follows:1) The working mechanism, force performance and deformation behaviour of four RC frame joints strengthened with the beam-column-end-CFRP indirectly under a monotonic load were investigated by different anchorage methods. The methods include the through-slab CFRP closed hoops, the border-beam-slab U-CFRP anchored hoops and the bolt-plate lock-anchored CFRP hoops.2) The experiment results show that the bolt-plate lock-anchored CFRP hoop can effectively avoid the debonding of the longitudinal CFRP at the end of beam, significantly increase the ultimate capacity of the joint.3) The failure modes, load capacity and deformation behaviour of four RC frame joints strengthened with the beam-column-end-CFRP indirectly were investigated by numerical simulation. The numerical analysis results are shown to be in close agreement with the test data.4) The method of calculating the shear strength of frame joints strengthened with the lock-anchor beam-column-end-CFRP indirectly was suggested, and the formulae for bending and shear capacity of beam were also derived. The formulae were verified by the finite element analysis results and experiment results. The formulae provide reference for the design of frame joints strengthened with the beam-column-end-CFRP indirectly.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  8. Sham hose drum drive means and hydraulic system of the structure,TE973
  9. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  10. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  11. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  12. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  13. Study on Virtual Simulation Technology of Safety Valves Based on SolidWorks,TH134
  14. Optimized Design of New Style Mast of ZJ50L Drill Rig,TE923
  15. The Structure Design and Finite Element Analysis for the Light Hydraulic Support with Auxiliary Beam,TD355.4
  16. Analysis on Static-dynamic and Fatigue Characteristics of Metallurgical Overhead Traveling Crane,TH215
  17. Research of Deep Excavation Construction Process for Nearby Subway Section Action,TU753
  18. Study on Geometric Characteristics and Fininte Element Anslysis of Hositing Ropes,TD532
  19. Analysis of Gray Cast Iron Cutting Factors and Reasonable Choice of Tools,TG506
  20. Expandable screen -based research and effective performance analysis TWIP steel,TF762
  21. Research on Computerized Double Cylinder Hosiery Machine’s Looping Mechanism Based on Element Finite Analysis,TS183.5

CLC: > Industrial Technology > Building Science > Building structure > Structure theory to calculate > Structural Mechanics
© 2012 www.DissertationTopic.Net  Mobile