Dissertation > Excellent graduate degree dissertation topics show

The Plastic-elastic Finite Element Analysis for the Longitudinal Supported Frame Construction of the Main Thermal Power Plants

Author: ChangFeiHu
Tutor: SuSanQing
School: Xi'an University of Science and Technology
Course: Structural Engineering
Keywords: Frame Structure Energy Dissipation Braced Modeling Low Cyclic Loading Elastic-plastic Analysis
CLC: TU313
Type: Master's thesis
Year: 2011
Downloads: 45
Quote: 0
Read: Download Dissertation

Abstract


The frame structure is used widely in main thermal power plants. The high-degree and large-span structures are usually used to meet the functional requirements of the plants. At the same time, inserting energy supporting in the framework of the columns is used to meet the requirements of the static and seismic design. Some scholars did related theoretical and design research about the vertical frame structure. Research interests focus on the pseudo-static and dynamic load test of the simplified structural model. The Numerical simulation of mechanical behavior of the structure is less. There was not so depth study of how to determine the optimal position in the structure. In the ANSYS software, this paper anal sizes the simplified model of the main plant in some electricity generating station by using of the elastic and plastic finite element method. The research has important theoretical and practical engineering value.Supporting structure of side span and supporting structure of mid-span were analyzed with finite element simulation in this paper. It included developing process and distribution characteristics of structure crack, hysteretic behavior, ductility, stiffness, lateral displacement of every floor, force condition of steel support and energy dissipation device. The result shows that bottom beam affected by low-frequency cycle load generated crack first, then column base generated crack followed increasing load. The first plastic hinge appeared in left column base of side span support structure, but it appeared in right column base of no support structure of side span. Hysteretic curve shows shuttle shape before entering yield situation and toxoplasma after entering yield situation. It also shows stiffness degradation. Support obviously improves stiffness for side span structure. Initial stiffness was increased by 170% and yield stiffness was increased by 110%. Stiffness of side span is higher than mid-span. Initial stiffness is more than 25% and yield stiffness is more than 17%. Story drift of second and third is larger than bottom. Energy dissipation brace undertook horizontal shear as much as approximate as energy dissipation device, but displacement was different. Displacement of energy dissipation device is energy dissipation brace 2 to 5 times. Structure mechanical behavior affected by brace and position of brace is different.According to the results, this article presents relationships about relative rigidity and relative loads of three structures. Design proposals to arrangement of supporting are also proposed. It has great theoretical significance and certain value in engineering.

Related Dissertations

  1. The Realization of Coal Liquefaction in the Continum Model System and the Experimental Research of Coal Liquefaction,TQ529.1
  2. Soft Sensor of Naphtha Dry Point on Support Vector Machines Regression,TE622.1
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Coupled Calculation of the Solidification Paths of Ternary Eutectic Alloys Based on Thermo-Calc,TG111.4
  5. Tooth Profile Modeling and Machining Error Analysis of the Face Gear,TH132.41
  6. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  7. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  8. Research on HID Lamp Rectifying Effect,TM923.32
  9. A Simulation Study of the Effects of Ischemia to Spiral Waves in 2-D Human Ventricular Tissue,R318.0
  10. Service Model Driven Architecture (SMDA) Oriented Modeling Techniques and Tool Implemention,TP311.52
  11. Research of Visualization Technology in the Virtual Test of Missile,TP391.9
  12. Design and Simulation of Flight Management Computer System CDU Unit in Flight Simulation,TP391.9
  13. Modeling Internet Link Delay Based on Measurement,TP393.4
  14. Measurement-Based Analysis and Modeling of Internet Delay,TP393.4
  15. Modeling Analysis and Slip Estimation for Lunar Rovers,TP242
  16. Aerial Target Anti-interference Recognition and Tracking System,TN215
  17. Based on SEM Quality Evaluation of Rural Compulsory Education in China,G522.3
  18. Army logistics material management system design and implementation,TP311.52
  19. Research on Adaptive Control of Recovery of UUV with Near Wall Constraint,TP273
  20. Table lamp shape of Art and Design,TS956
  21. Prototype Development of Intimate Apparel Mannequin,TS941.2

CLC: > Industrial Technology > Building Science > Building structure > Structure theory to calculate > Structural elasticity and plasticity
© 2012 www.DissertationTopic.Net  Mobile