Dissertation > Excellent graduate degree dissertation topics show

Study on the Application and Numerical Simulation of Hydraulic Automatic Control Flap Gate in Sandy River

Author: WuPeiJun
Tutor: LiYuJian
School: Xinjiang Agricultural University
Course: Water Resources and Hydropower Engineering
Keywords: sandy river hydraulic automatic control flap gate numerical simulation sediment pressure
CLC: TV663.8
Type: Master's thesis
Year: 2011
Downloads: 46
Quote: 0
Read: Download Dissertation

Abstract


Hydraulic automatic control flap gate has been widely used in various hydraulic engineering with its many advantages like simple structure, open-close in time, energy conservation and environmental protection and so on. Especially in recently year, this flap gate is being successfully used in sandy river hydraulic engineering and bring excellent benefits in economy and society. Hydraulic automatic control flap gate can eliminate the sediment and floating debris in front of the gate when its opening, so its feature is very suitable to applicate in sandy river, but its also could bring many disbennifit influence such as the gate can’t be opened normally because of the sediment, the water would fluctuate when its opening and the sediment would affect the gate’s structure. This paper take the type of composite motion hydraulic automatic control flap gate for example and expand study according to these problems and obtain the effect of sediment in front of the flap gate, so its can provide evidence for the application of the hydraulic automatic control flap gate in sandy river. The main contents of the paper are as follows:(1) Reviewed the development and research status of the flap gate and pointed out the problem of studying the hydraulic automatic control flap gate in sandy river.(2) Analyzed the mechanism of turnover and stability of the flap gate in sandy river, discussed the difference between the application in clearwater river and in sandy river.(3) Derived the balance equation of the flap gate in sandy river and the critical sediment height formula in abnormal opening level. Then combined with the practical engineering and got the normal opening level of the gate and the critical sediment height in the front of the gate under the abnormal opening level and the design flood level.(4) Derived the opening curve of the flap gate and analyzed the effect of sediment pressure on the flap gate. And then obtained the curve of the water level on the flap gate and the critical sediment height under the condition of the gate can’t be opened normally.(5) Established finite element model of various conditions by using the software of Patran.(6) Calculated the numerical simulation of various conditions finite element model by using the finite element software of ABAQUS and furtherly obtain the effect of sediment pressure on the flap gate in sandy river though comparing the stress and deformation of the numerical simulation results.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Hydraulic Engineering > Water control,hydraulic structures > Sluice > Gate > Hydraulic automatic control gates
© 2012 www.DissertationTopic.Net  Mobile