Dissertation > Excellent graduate degree dissertation topics show

Study on Rock Pressure of Donghai Coal Mine Deep Coal-seam Working Face

Author: MengZuo
Tutor: XiaoFuKun
School: Heilongjiang Institute of Science and Technology
Course: Mining engineering
Keywords: roof strata activities behavior of superincumbent strata abutment pressure similar simulation numerical simulation
CLC: TD325
Type: Master's thesis
Year: 2009
Downloads: 287
Quote: 1
Read: Download Dissertation

Abstract


The engineering examples of Donghai mine 32# seam left 9 working face, adopt the method combined theoretical analysis, field observation, laboratory testing and numerical simulation, through theoretical analysis and practical investigations on the rules of roof strata activities, behavior of superincumbent strata and the distribution of abutment pressure of 32# seam left 9 working face, obtain various parameters of roof activity on this working face, range of behavior of superincumbent strata and characteristics of abutment pressure distributions, provide reference for surrounding rock control in coal face when the same coal mine of LongMay MINING GROUP CO.LTD goes deeper mining.Through analysis the observation data, obtain that first weighting interval of main roof is 45.8m and the average periodic weighting length is 19.7m; through similar material simulation test, obtain that roof in goaf form caving zone, fractured zone and bending zone.The height of the caving zone is about 5.2m, is about 3.8 times mining height; the height of fractured zone is about 30m, is about 22.1 times mining height; the height of bending zone is153.4m. Subsidence coefficent of different depths strata vs. ratio between strata height to the roof and thickness of coal seam mined have linear relationship, subsidence coefficent of strata decreases with the height of strata increased. The maximum value of abutment pressure changes with working face advance, the range of anallobar can reach about 100metres.RFPA is used to analyze the rules of roof strata activities and distribution of abutment pressure,the results of field observation and similar simulation are contrasted with the analysis rules using RFPA. Through analysis on comparing with some data of shallow mining, there is no direct relationship between presentation of the mine pressure and mining depth. With mining depth increased, abutment pressure slightly increase, the ratio of caving zone and fractured zone vs thickness of coal seam mined is higher than data of shallow mining. The relationship of the distribution of abutment pressure and the height of the caving zone and fractured zone vs mining depth remains to be further investigated.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Adult OSAHS Preoperative and Postoperative Nasal and Pharynx Cavity and Soft Palate of the Numerical Analysis of Fluid-structure Interaction,R766
  21. Research on Dust-Isolation Technology with High Pressure Air Curtain for Mechanized Tunneling Face,TD714.4

CLC: > Industrial Technology > Mining Engineering > Mine the pressure and support > Rock pressure and rock movement > Rock movement
© 2012 www.DissertationTopic.Net  Mobile