Dissertation > Excellent graduate degree dissertation topics show

The Applied Research of High-performance Thermal Insulation Block in Urumqi Region

Author: WangYang
Tutor: YuJiang
School: Xinjiang University
Course: Structural Engineering
Keywords: Efficient insulation block Mechanical Properties Compressive strength Seismic checking Thermal insulation properties
CLC: TU522.3
Type: Master's thesis
Year: 2009
Downloads: 77
Quote: 1
Read: Download Dissertation

Abstract


For efficient insulation block application in Xinjiang and even across the country , you need the block mechanics performance test theoretical research . In addition to the basic block material properties test ( block compression , insulation , etc.) need to be on the block in the actual engineering feasibility study . The masonry of these performance will be directly related to whether the block should be widely applied . Compressive properties of (1) , mainly used for the pressure , the load of the upper structure of the self-weight spread foundation and the masonry of the most important performance indicators . In accordance with the \The average compressive strength reached 10.8Mpa, to reach load-bearing requirements . Seismic checking ( 2) PKPM software to actual brick wall materials with high insulation block Urumqi works , applied research . In Urumqi, Xinjiang seismic intensity 8.0 ( 0.2 g ) region , wall materials using the efficient insulation block construction of masonry buildings , when the wall layout rules , structure necessary ring beams and constructional columns , the masonry buildings in seismic performance to meet the regulatory requirements . In such masonry buildings design should be strictly implemented seismic design , structural arrangement to avoid the unfavorable conditions of the split-level structure , floor wide open hole to ensure the safety of the structure . ( 3) thermal performance with theoretical calculations and experimental this efficient insulation block insulation performance . In this paper, the results could be efficient insulation block masonry structure design and theoretical research reference . The study found that the efficient insulation block has good insulation properties , while the mechanical properties of the general sintered porous brick of strength , has broad prospects for development and promotion of value .

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  3. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  4. Experimental Study of Porous Composite Materials on the Base of Recycled Concrete Powder-Cement,TU528
  5. The Experimental Research on Regeneration Aggregate and Proportioning of Recycled Concrete Brick,TU528
  6. Study on the Recycling of Post-Consumer Polyester Textiles,X791
  7. Fabricationand Properties of SiC-AlN Multiphase Ceramics Prepared by Gelcasting,TQ174.62
  8. Recycled aggregate semi- rigid concrete preparation and molding of test,TU528
  9. Synthesis of Polysulfones and Modification for Epoxy Adhesives,TQ433.437
  10. Preparation of tricalcium silicate and silicon physicochemical properties of calcium phosphate cement,R318.08
  11. Structure and Characterization of Room Temperature Self-crosslinked Acrylonitrile-butadiene-styrene,TQ325.2
  12. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  13. Needle Coke Powder Molding Process and Its Impact on the Performance of Carbonization Products,TQ127.11
  14. Modification of Talc Powder and Its Reinforcing and Toughening on Recycled Polypropylene,TQ325.14
  15. Effect of Adding ZrO 2 Nanopowder on Microstructure and Mechanical Properties of Carbon Steel,TB383.1
  16. Preparation of Surface-functionalized Graphene and Its Influence on the Mechanical Properties of Nanocomposite Materials,TB332
  17. Preperation of Low Friction and Wear Resistant High-Purity Alumina Ceramic,TQ174.1
  18. The Study of Forming Process and Properties of PTT/PET Skin-Core Composite Monofilament with Large Diameter,TQ340.64
  19. Research on Structure and Mechanical Property of Hook and Loop Fastener,TE931.2
  20. Preparation of Unfired Bricks by Industry Sludge Solidified Cement and Analysis of Economy and Technique,X703
  21. Study on FRP Confined Rectangular Concrete Columns,TU375.3

CLC: > Industrial Technology > Building Science > Building Materials > Non-metallic materials > Brick, tile and block > Block (brick board)
© 2012 www.DissertationTopic.Net  Mobile