Dissertation > Excellent graduate degree dissertation topics show

Design and Study on Straw Briquetting Equmipment

Author: LianMeng
Tutor: LiBaoQian
School: Henan Agricultural University
Course: Agricultural Mechanization Engineering
Keywords: The straw stalk feedstuff The compression machine Design Analysis Simulation
CLC: S817.12
Type: Master's thesis
Year: 2008
Downloads: 304
Quote: 2
Read: Download Dissertation

Abstract


This article has made a brief outline to the theoretical investigation about biologic straw stalk solidify shaped. And introduce the meaning for developing briquetting straw fodder. I take an aim at the design of straw(feedstuff)briquetting machine, and determine the integrated design scheme for briquetting machine.The hydraulic pressure system was counted in detail, and the basic parameter of it was determined. According to designing conceive, principal part was designed which was named compressing room. I determine parameter of the compressing room, and establish three-dimensional entity model for every part. The mechanism was assembled with part models.The model of compress room was analyzed with the finite element software Cosmosworks which was a plug-in of Solidworks. According to practical situation, I defined constraints and loads for finite element analysis. Analyzed stress distribution and distortion of the model. Aim at the shortcomings, I improved the design. The improved model was analyzed with static analysis and fatigue analysis to make sure that the stress deformation and fatigue failure within the permit area.I designed the mechanism for closing and unclosing in biomass briquetting machine in this article,two design schemes were contrived for the mechanism. The original Scheme based on the theory of existing equipment, which used hydraulic cylinder directly action to the covering for closing and unclosing. The basic parameters were determined for it. Base on the parameters I establish three-dimensional entitative model for the mechanism, and analyzed it with Cosmosmtion for computer simulation.The improved scheme adopt crank and rocker mechanism for lock and unlock the covering, hydraulic cylinder powered for this mechanism. The covering will be more stable when the dead point appears. Hydraulic cylinder principal overcome the gravitation and friction. The acting force was little, so we can decrease the parameter of hydraulic cylinder for cost cutting.I designed this crank and rocker mechanism with auxiliary circle, the parameters of the crank and rocker mechanism were counted,such as minimum transmission angle and pressure angle. I simulated the two schemes with computer simulation software, and output the result curves and cartoon.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. Image Analysis System of Metal Transfer of Gas Metal Arc Welding,TG444
  8. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  9. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  10. Research on the Aiming Signal Processing of the Optical Probe Measurement System,TH74
  11. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  12. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  13. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  14. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  15. Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes,V241.5
  16. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  17. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  18. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  19. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  20. Key Technologies of Dam-break Life Loss Risk Assessment Research,TV122.4
  21. An Empirical Study of Contemporary Compehensive Urban Design in China,TU984

CLC: > Agricultural Sciences > Livestock, animal medicine,hunting,silkworm,bee > General Animal Science > Animal husbandry machinery and equipment > Feed harvest processing machinery > Feed processing machinery
© 2012 www.DissertationTopic.Net  Mobile