Dissertation > Excellent graduate degree dissertation topics show

Study on Compound Tool Paths Generation of Free-form Curve and Surface Numerical Control Machining

Author: YangQinWen
Tutor: YangXuJing
School: Hunan University
Course: Mechanical Engineering
Keywords: NC machining Cutter location points Compound tool path B-spline curve fitting
CLC: TG659
Type: Master's thesis
Year: 2009
Downloads: 314
Quote: 3
Read: Download Dissertation

Abstract


As to most programs given by CAM software, line interpolation and arc interpolation are the interpolations which are mostly used. Spline interpolation could be the powerful supplement for line and arc interpolation as its brevity and smoothness. Integrating several interpolations are significant to free-form curve and surface NC machining.A new approach to compound tool path generation based on discrete cutter locations is proposed. The mathematical model integrating line fitting, arc fitting and B-spline fitting is constructed. Through error analysis of three fitting methods, the iteration of different fitting methods and tool path segmenting could be carried out. Compound tool paths are produced.First, arc fitting and B-spline fitting are carried out based on least square method. The procedure for B-spline is divided into two parts. After the original control points being gotten on the uniform parameterization of data points, the parameter values are optimized to get new control points.Second, the method for selecting line fitting, arc fitting and B-spline fitting according to precedence level is given, implementing the combination of three fitting methods. The judgement of fitting error decides the iteration of different fitting methods. The line fitting method is definitely used when the points distance is beyond the set valve value in order deduce calculation.Third, reading cutter location points, the machining method consists of line interpolation, arc interpolation and B-spline interpolation is achieved. The compound tool paths are generated for planer machining. The compound tool paths integrating line and B-spline are used for surface machining. The optimized tool paths could advance stability for milling and shorten the time for continual speeding up and speeding down in order to increase efficiency, shorten machining time and improve the surface roughness.Comparing the parts using compound tool paths generating method to using original method, the surface quality and efficiency are both improved.

Related Dissertations

  1. Research on Multi-Sensor Embattling and Continious Tracking Technique Applying for Anti-Stealth and Anti-Interference,TN953
  2. The Fatigue State Recognition of the Driver Based on Eye Detection,TP391.41
  3. Computing Minimum Distance between Curves/Surfaces Based on PSO Algorithm,O182
  4. Research on Detecting Optical Fiber Geometric Parameter Based on Machine Vision,TN253
  5. The Study on Rules of Carbon and Nitrogen Metabolisms and Its Relationship with Flavor Quality of Strong Aroma Style Flue-cured Tobacco in Henan,S572
  6. Sea seamless Datum establishment,P229
  7. The Design and Research of Thermocouple Vacuum Gauge,TB772
  8. Research on the Models of GPS Height Fitting Based on BP Neural Network and Their Applications,P228.4
  9. Automotive the starter performance of high-precision high stability of the test method and application,U467
  10. Tool Path Planning for Multi-axis NC Machining Based on Closed-loop Stiffness Model,TG659
  11. Study on the Law of Ground Settlement with Shield Driven Method in Ningbo Area,U455.43
  12. The Special Machine Tool of the Sidewall Linear Pattern Processing Algorithm,TG659
  13. Real algebraic curve rasterization,TP391.72
  14. Pipeline magnetic flux leakage detection signal reconstruction technology within,TN911.23
  15. Ethanol - water Raman spectroscopy and density correlation,O657.37
  16. Research of Image Edge Detection Based on Wavelet Transform and EMD,TP391.41
  17. Properties of Fitting Sets and Injecters of Fitting Sets,O153.3
  18. Analysis of Contour Error and Contour Algorithms of CNC Machine,TG659
  19. The Research on Automatic Classification of Electrodes Based on Shape Retrieval,TG661
  20. Simulation of Mechanical Motion and CNC Processing Based on PRO/E and VERICUT,TG659
  21. Research on Software of Making 2-D Rapid NC Program System of Turbine Compressor,TH45

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile