Dissertation > Excellent graduate degree dissertation topics show

The Numerical Simulation and Experiment Research of Metallurgical Slag Cooling Water-curtain Nozzle

Author: YuanChangYao
Tutor: FuLianDong
School: Wuhan University of Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: Water curtain nozzle Numerical simulation Fluent Analysis of flow field Two-phase flow
CLC: TF085
Type: Master's thesis
Year: 2009
Downloads: 83
Quote: 2
Read: Download Dissertation

Abstract


In the technology that the steel slag is poured by water, resulting in a large number of dust and water vapor, which is a big threaten to the workers’working environment, and so far have not effective solution. This paper’s aim is to develop new application of water curtain,which is formed above the slag to cooling and covering the dust and water vapor,which is to solve practical problems. Numerical simulation and test method are used in this paper, researches are the following:(1)Using the mathematical method of analysis the forming mechanism of water curtain. Expressing the relationship between the internal parameters of water curtain nozzle through the mathematical method. The preliminary design of water curtain nozzle is according to the field work condition.(2)Establishing simulation mode,then divid mesh、model assumption、install the border condition and iterative computation of two conditions in steady state and unsteady state at last.(3)Using Fluent software which provide for the VOF model numerical simulate the various structure parameters of spray nozzle in steady-state flow field, and analysis the iMPact of nozzle’s structure parameters to the spray angle by simulation, as well as the relation between the pressure and spray angle. Numerical simulation results show that there are best match between parameters to make the spray angle is optimum.(4)Using Fluent software which provide for the VOF model numerical simulate the spray nozzle in turbulent flow field. Through simulation reach the volume distribution at different moments of the gas-liquid and the dynamic formation of the water curtain. The results show that the design’s correctness of water curtain nozzle and feasibility of the function of water curtain.(5)The consistency of numerical simulation results and test results shows that the feasibility and superiority of the numerical simulation. The problem of cost is solved and provides new path for the design a better efflux performance of nozzle water curtain.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. Study of the High Temperature Gas-Liquid Two Phase Flow Rate Proportional Conrtol Valve,V233.2
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Study of Effect of High Temperature Seperator on Hydrodynamices in CFB Boiler Furance,TK229.66
  13. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  14. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  15. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  16. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  17. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  18. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  19. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  20. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  21. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649

CLC: > Industrial Technology > Metallurgical Industry > General issues > Metallurgical plant > Water supply, drainage
© 2012 www.DissertationTopic.Net  Mobile