Dissertation > Excellent graduate degree dissertation topics show

Simulation and Study on 32-electrode Electrical Resistance Tomography System

Author: YanZengWei
Tutor: DengXiang
School: Beijing Jiaotong University
Course: Mechanical and Electronic Engineering
Keywords: Electrical Resistance Tomography Direct Problem MATLAB PDE toolbox Finite Element Image Reconstruction
CLC: TP274.2
Type: Master's thesis
Year: 2009
Downloads: 99
Quote: 3
Read: Download Dissertation

Abstract


Electrical Resistance Tomography (ERT) can infer the distribution of the conductivity by measuring the joint electric potential in the sensitivity field and then get the distribution of object field in the pipe or vessel, without destroying or interfering with the object field. It has a wide application prospect in two-phase flow measurement with the advantages of low cost and non-invasion etc.To improve the size discrimination ability of the electrical resistance tomography system and satisfy the two-phase or multiple phase measurement of different pipe sizes, especially large size, a new method of 32-electrode ERT system is put forward. The main achievements are as follows:(1) According to electromagnetic principle, math model of ERT system is built, analytic solutions of forward question of ERT system in situations of the uniform medium, discrete phase concentric and discrete phase eccentric distribution are obtained. Impedance model of the electrode arrays is established. It plays the guiding role for the design of the electrode arrays. Stimulation and measurement modes of ERT system and characteristics are analyzed, it provides basis for model selection.(2) Based on the MATLAB PDE, simulation research of the 32-electrode ERT system is accomplished and electric potential and field distributions under the condition of the adjacent and comparative mode in the sensitivity field are obtained. The influences of the flow pattern, electrode number and air bubble’s position and size on the solution of the ERT system are stuied. Based on the simulation results, a new method of solving the ERT system is proposed.(3) With the finite element method, the meshing of sensitive field is realized and the finite equations are established and solved on the basis of VC++. Then the numerical potential solutions of all the meshing points in the sensitive field are obtained, and mutually verfied with the results simulated by MATLAB PDE. Therefore, the foundation for the follow-up image reconstruction research is eatablished.(4) The principles of image reconstruction, characteristic of usual algorithms are analyzed. The principle and application of LBP algorithm are emphatically optimized.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  4. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  5. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  6. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  7. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  8. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  9. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  10. Design of Testing Equipment for Electronic Products,TN06
  11. S-lay Installation Analysis for Deepwater Pipeline,TE973
  12. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  13. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  14. The Analysis and Comparison of Adjacent Segment Degeneration of the Finite Element Caused by Three Posterior Lumbar Fusion Style,R687.3
  15. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  16. Different Bottom Structure of Dental Brackets Affect the Adhesiveness-Three Dimensional Finite-element Analysis,R783.5
  17. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  18. Sham hose drum drive means and hydraulic system of the structure,TE973
  19. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  20. The Stability Analysis of Earth-Rock Dam with Fluid-Structure Interaction Effect,TV641
  21. Studies on Wind-induced Dynamic Response and Vibration Control of Guyed Cat-head Transmission Tower-line System,TM753

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile