Dissertation > Excellent graduate degree dissertation topics show

Development of High Precision Dynamic Monitor of Fluid between Oil Wells

Author: LiYang
Tutor: KangZhongJian
School: China University of Petroleum
Course: Detection Technology and Automation
Keywords: Weak Signal Detection earth resistivity constant current source pseudo-random code fuzzy control
CLC: P631
Type: Master's thesis
Year: 2009
Downloads: 46
Quote: 0
Read: Download Dissertation

Abstract


In petroleum exploration and development, the DC current is usually put into oil well and detect the weak voltage in surface which can deduce earth resistivity .In this way, the direction of dynamic fluid can be indicated, which contain electrolytes and is put into oil well. It can also indicate the distribution of remaining oil.The voltage acquisition system should detect the surface voltage at the background of strong noise. Here we use the pseudo-random code which is based on spread spectrum theory to modulate the DC current putting into oil well, and then use the relevance principle to suppress noise and improve detection precision. The constant-current source apply the MSP430 microprocessor as the core of variable parameters fuzzy PID controller to keep the current constant when load is changing.The circuit of the acquisition system includes amplification circuit, filter circuit, A/D conversion circuit; the software assumes responsibility for controlling the equipment, processing the digital signal, de-spreading with relevant algorithm. Constant current power supply includes the thyristor rectifier circuit, monitor and control circuits based on MSP430 microprocessor. The software achieves the variable parameters fuzzy PID controller in order to control the trigger angle of thyristor. Finally, we verified the performance of devices under the laboratory conditions and analyze the result.

Related Dissertations

  1. Study of Synchronization and Adaptive Frequency in Frequency-Hopping System,TN914.41
  2. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  3. Erbium-doped fiber amplifier pump laser drive source research applications,TN248
  4. Research on Automatic Control System of Hump Push Peak Speed Based on Fuzzy Neural Network,U284.6
  5. The Simulation Perfermence and Analysis for Election Control Hydraulic Litmitedslip Differential of Loader Based on Fuzzy Control,TH243
  6. Excitation System Design and Research of High-frequency Fatigue Machine,TH871.3
  7. Mobile Robot Navigation Control Based on the Weights of Multi-sensor Information,TP242
  8. Research of Weak Signal Detection and Identification,TN911.23
  9. Direct Sequence Spread Spectrum the DMF capture technology simulation design,TN914.42
  10. Design of a Novel Water Treatment System Based on TiO2 Superoxidation and Microwave Plasma Techniques,X703
  11. Pseudo-random keying RF circuit simulation design,TN925
  12. Omnidirectional mobile robot Intelligent Motion Rehabilitation Strategies,TP242.6
  13. Pseudo Code Phase interrupted continuous wave radar signal processing system design and FPGA implementation,TN791
  14. Pseudo-random code phase modulation RF circuit design,TN702
  15. Study on the Control System of Refinery Wastewater Treatment,X742
  16. Skid steer loader working device damping system design and research,TH243
  17. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  18. Frequency energy in the sewage treatment in the application of automatic control,TP273
  19. Articulated tracked vehicle traveling control of a predetermined path,TD424
  20. Optimized Control for Aluminum Reduction Cell Based on Knowledge Driven,TF821
  21. M18 single- disc copper casting machine control system research and design,TP273

CLC: > Astronomy,Earth Sciences > Geology > Geology, mineral prospecting and exploration > Geophysical exploration
© 2012 www.DissertationTopic.Net  Mobile