Dissertation > Excellent graduate degree dissertation topics show

The Design of the High-Side Current-Sensing in Buck DC-DC Converter

Author: ChenYongQian
Tutor: FengQuanYuan
School: Southwest Jiaotong University
Course: Microelectronics and Solid State Electronics
Keywords: Current Mode Current-sensing Voltage level-shift resistor network Common base
CLC: TM46
Type: Master's thesis
Year: 2009
Downloads: 164
Quote: 1
Read: Download Dissertation

Abstract


With the rapid development of the electronics and the increasing demand for consumer electronic, the efficiency of the battery has become a focus, and the high efficiency’s dc to dc converters become to the power management’s topic too. The current mode control has many advantages than the voltage mode such as better stability and faster dynamic response and so on. So the current-sensing is an important part in the dc to dc converters.In this paper, we research the current mode control dc to dc converters design, the current-sensing methods and the choices of current-sensing to the dc to dc system’s needs, combines the advantages of several detection methods, design a new method, and get good results, this is the first job of this paper. Then on the choices of the design circuits, because of the wide ranges of the input voltage, design the circuit to fit the system’s needs, make the accuracy to the 97%, this is the second job of this paper. Behind it we research the error in the current loop, and analysis the causes of the error, this is the third job of this paper. Finally, in the 0.6um 30v BCD process, we simulate the circuit with the hspice software, and do a compare with the IEEE’s circuits, this is the forth job of this paper.In the beginning of this paper we introduce the importance of the power ICs and the development. Then we describe the traditional current mode DC-DC power management IC control—current mode and voltage mode, and introduces several traditional current-sensing methods, with an analysis of their advantages and disadvantages. Then give the methods of this paper and the circuit design’s background, followed it we show the current-sensing amplifier and current-sensing circuit design. Behind it, we give the current-sensing circuit’s simulation results based on a high-voltage buck dc to dc power converters system. Finally we sum up this work.

Related Dissertations

  1. Design of Voltage Reference on Low Supply,TN432
  2. The Research of ISFET Biosensor Read-out Circuit,TP212.3
  3. The current mode WLED boost constant current drive,TN402
  4. Design of Multiple Modes WLED Driver Controller,TM46
  5. Peak Current Mode Boost Converter Low Power Research,TM46
  6. Modeling System of Peak-Current-Mode-Controlled Buck Converter and Design of the Controller,TM46
  7. The Design of the Synchronous Rectification Buck DC-DC Converter Based on Peak Current-Mode,TM46
  8. Design of a Low-power Boost DC/DC Converter with Selectable Current Limit,TM46
  9. Based on the third generation current conveyor current-mode filter design,TN713
  10. A Design and Study of A Green Mode’s Switching Power Supply,TN86
  11. BUCK-BOOST , peak current mode power chip design,TM46
  12. Design and Stability Analysis of Synchronous Buck DC/DC Chip with Programmable Output,TM46
  13. Design of Current-Mode Buck DC-DC Converter Control IC,TM46
  14. Research on Single-Stage Full-Bridge Soft-Switching PFC Technology Based on Digital Control,TM46
  15. Design of a Boost AC-DC Active Power Factor Correction Controller,TM46
  16. Design of a High Efficiency Low Ripple Peak Current Mode Boost DC-DC Regulator,TM44
  17. The Key Technology of White LED Display Backlighting Driver,TM46
  18. Design of Step-up DC/DC White LED Driver Chip Embedded EEPROM,TN402
  19. Design and Stability Analysis of High Efficiency Current Mode Buck DC-DC Regulator,TM44
  20. One kind of mains -powered white LED driver circuit control chip design,TN432

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net  Mobile