Dissertation > Excellent graduate degree dissertation topics show

Development of Online Monitoring System of Power Cable Based on DTS

Author: LiQiang
Tutor: WangYanSong
School: China University of Petroleum
Course: Detection Technology and Automation
Keywords: Distributed Temperature Sensing Power Cable Online Monitoring Dynamic current carrying Capacity Finite Difference method Field-Circuit Method
CLC: TM755
Type: Master's thesis
Year: 2009
Downloads: 346
Quote: 2
Read: Download Dissertation

Abstract


The power cable applies in the power system is getting more and more widespread. It’s very significant to realize safe, reliable and economical operation of power cable to ensure the security and economy of power system. In actual power cable operation, it will be able to cause the local temperature of cable or cable accessories to rise before the cable has electrical failure, resulting in further damage until insulation breakdown. Based on distributed temperature sensing, the temperature of cable’s surface can be measured. Then the potential safety risks can be discovered early through power cable temperature field analysis and dynamic current carrying capacity calculation. And it plays the role which prevents accidents before they occur.The whole frame structure of system is analyzed and designed in this paper by field works. The operating current of cable is required when analyzing the power cable thermal field and calculating the dynamic current-carrying capacity. When the system is applied in traditional transformer substation or power plant, it is difficult to obtain the cable electric current through corresponding with other detecting and controlling equipment in power system. Considering, the adaptability, scalability, independence and communication protocol influence of the system, an AC electricity conversion module is configured for the system. And the system can acquire the operating voltage and current of cable by high speed, multi-channel data acquisition card based on PCI bus.The main methods of power cable temperature field calculation are summarized in this paper. And the thermal circuit method and numerical heat transfer method are analyzed mainly. Because the thermal circuit’s result is less conservative, and the numerical heat transfer method’s computational speed is slow, field-circuit method based on temperature of cable surface is presented in this paper. According to the characteristics of single-core and three-core cable structure, One-Dimensional Thermal Model can be established for single-core cable temperature field, and two-Dimensional Thermal Model can be established for three-core cable temperature field. In the numerical solution procedure of three-core cable temperature field, the thermal circuit method’s result can be applied as the initial value of iterative finite-difference method, effectively improving the convergence rate, saving the computing time.The system software has been designed according to demand analysis, software structure and software function in this paper. And the key technologies of software development have been analyzed. A dynamic link library which is used to calculate the single-core or three-core temperature field and dynamic current carrying capacity has been programmed separately in VC++ development environment. Further, the online monitoring software of power cable has been developed.

Related Dissertations

  1. 110kV Submarine Power Cable’s New Technique Research Based Online Comprehensive Montior,TM247
  2. Study on Process Method and Parameter Optimization of the Remained-heat Treatment of Marine Heavy Forgings,TG316
  3. The Research on Thermal Field Calculation of Tightly-coupled Dry-type Air-core Split Reactor,TM47
  4. Design of Casing Damage Monitoring Management System Based on Fiber Optic Sensor and Web,TP311.52
  5. Study on Lighting Over-voltage of Underground Cables,TM863
  6. Study on Fouling Monitoring and Sootblowing Optimization for Coal-Fired Boilers,TM621.73
  7. Ground current transformer core power line monitoring system,TM41
  8. Things for substation equipment line temperature measurement system based on,TM63
  9. Design of Rational Bézier Minimal Surface: Finite Difference Method,O186.11
  10. The Hole Repairing in Surface Based on Partial Differential Equations,O186.11
  11. Design and Analysis of Static & Dynamic Performance of the Aerostatic Spindle of Ultra-precision Machine Tool,TG502.31
  12. Analysis on Mechanism and On-line Monitoring System of Acoustic Emission Oriented to Precision and High Efficiency Grinding,TG580.1
  13. The Design of On-line Monitoring System of Transformer Fault,TM407
  14. Fiber-based temperature measurement of a device fault diagnosis and research,TH811
  15. Design of Management Platforms for WSN-Based Monitoting of Building Environment,TP274
  16. Research on Accoustic Emission for On-Line Valve Leak Monitoring Technology,TG115.28
  17. Theoretical Study on the Electronic Properties in Semiconductor Quantum Wires and Quantum Dots,O471.1
  18. Research and Application of HXD1 locomotive online diagnosis and evaluation system,U269.3
  19. Real Time Monitoring System for Power Cable Temperature Based on Optical Fiber Measurement Technology,TM764
  20. Stability Analysis of the Reinforced Retaining Wall under Earthquake,TU476.4
  21. Effect of Inorganic Nano-fillers on Electrical Treeing in LDPE,TB383.1

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Lines and towers > Line maintenance
© 2012 www.DissertationTopic.Net  Mobile