Dissertation > Excellent graduate degree dissertation topics show

Reasearch and Design of the RF Power Amplifier

Author: QiWei
Tutor: DengZhongLiang
School: Beijing University of Posts and Telecommunications
Course: Applied Computer Technology
Keywords: Wireless LAN Amplifier Power PCB
CLC: TN722.75
Type: Master's thesis
Year: 2009
Downloads: 700
Quote: 10
Read: Download Dissertation

Abstract


With the development of wireless communications and microelectronics technologies, modern communication is developing towards adding channel capability, mufti-carrier, mufti-level, widening the frequency and higher PAR. All these changes make the design of wireless communication equipment more difficulty. As the core of the transmitter, the performance of RF power amplifier restricts the technique level of the whole system. We discuss the design process of RF power amplifier and have designed and implemented RF power amplifier of bi-direction with power being 500mw. The works included in this paper are as follows:1. RF power amplifier is introduced including technical indicators, technical requirements and general methods of design, and then the method to improve the memory effect by circuit design is put forward to.2. The whole RFPA circuits are designed in this thesis. The circuit is designed by special two parallel components, effectively improving the amplifier power up to 500mw while the bi-direction circuit is also designed.3. The radiating, crosstalk and resonance of PCB is analyzed, the PCB of RF power amplifier is designed by Protel .According to the EMC principle. Moreover, a shielding box is designed to cool and shield the RF power amplifier.4. RF power amplifier’s test schemes including S parameters, power, and gain have been executed, and the result is also given.

Related Dissertations

  1. The Research on Action Mechanism of Additive Used in Through-Hole Copper Plating and Its Selection,TQ153.14
  2. Design and Implementation of FPGA Teaching Experimental Board Based on EP2C8,TP391.6
  3. Machine Vision’s Research and Application in the SMM of SMT,TP391.41
  4. The Intelligent Routing Based on the Algorithm of Lie Group Machine Learning, LML,TN710
  5. Hardware Research and Design of the IP Camera Terminal Based on Cadence,TN948.41
  6. The Design and Analysis of Press Machine Driven by Linear Servo Motor,TG305
  7. Application of the Wireless LAN in the Industrial Control,TP273
  8. Random Vibration Reliability Analysis and Research on Solder Joint of PBGA Board Level Assembly,TN405
  9. Research on Frame Traffic Control, Prediction and Energy Efficiency in Wireless Local Area Networks,TN925.93
  10. Analysis on 802.11N Wireless Campusnetwork Design and Implementation,TN925.93
  11. Research on Algorithm of PCB Defect Detection Based on Image Analysis,TN41
  12. Control object based on a variety of new chips and chip Experimental Equipment,TP368.12
  13. Based on RBF artificial neural network in the application of PCB drilling process,TN405
  14. GPRS-based wireless nodes tie breaker condition monitoring design and implementation,TN929.5
  15. 802.11p standard for in-vehicle networks and broadcast MAC protocol design and optimization,TN929.5
  16. The Research on Key Account Management of Atotech (China) Chemicals Ltd.,F426.7
  17. PCB Inspection System Based on Visual Processing,TN41
  18. Research on Automatic Grinding and Testing PCB Micro-drilling Technology,TN41
  19. Clamp Rogowski Coil Electronic Current Transformer Based on Printed Circuit Board,TM452
  20. Research on Hardware Circuit for Magnetic Bearing,TH133.3
  21. ARM and FPGA -based high-speed data acquisition card design and implementation,TP274.2

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Basic electronic circuits > Amplification technology,the amplifier > Amplifier > Amplifiers: the role of sub- > Power amplifier
© 2012 www.DissertationTopic.Net  Mobile