Dissertation > Excellent graduate degree dissertation topics show

Theoretical and Experimental Study on Elastic-plastic Bending of Wide Plates

Author: ZhouYong
Tutor: LuXianFeng
School: Nanchang University
Course: Materials Processing Engineering
Keywords: work-hardening bending force springback technological experiment numerical simulation
CLC: TG386
Type: Master's thesis
Year: 2009
Downloads: 63
Quote: 0
Read: Download Dissertation

Abstract


In recent years, with the high-speed development of the national economy and the continuous improvement of people’s living standards, automobile consumption has become one of hot spots and bright spots for people in China to upgrade consumption. The automobile brings the convenience for people’s life, at the same time also brought many questions. There are still many serious shortcomings need to be solved urgently, of which the automobile lightweight is a big one.Bending is one of the most common metal forming processes in automobile industry. At present ,there are much reaserch on ordinary low-carbon steel bending,but little on aluminum alloy and high strength steel bending at home and abroad .So the study on bending properties of aluminum alloy and high strength steel is obviously of great both theoretical and practical significance.This paper take aluminum plates (1060).and high strength steel plate (QSTE460) as research objects..The most essential characteristics of plastic deformation were analyzed..By utilizing work-hardening of power function law, considering displacement of neutral layer and thickness change of material in deforming zone,a new theoretical calculation formula about bending force is established, alse a new theoretical model about springback is discussed and proposed based on plastic deformation characteristics of work-hardening of power function law. Die compensation is studied by using the knowledge of plastic mechanics and rebound theory,,the parameter formulas of die compensation are deduced.In order to verify above theory, 4 group of technological experiments about two kinds of research materials are made,of which the mould designed according to the compensation formula. The corresponding bending force-stroke curve、rebound value and maxium bending force are obtained.Simulation experiment was carried on via the Dynaform. Several results obtained as follow:the distribution of equivalent stress and strain、bending force-time curve、the peak bending force、the distribution of strain in thickness direction, and some theoretical characteristics in the process of bending deformation was verifid. The relationship between primary and secondary of facts influence on springback

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Cold stamping ( sheet metal processing) > Cold stamping process
© 2012 www.DissertationTopic.Net  Mobile