Dissertation > Excellent graduate degree dissertation topics show
Research on the Surface Profile Measurement of 3D Object Based on Hand-held Structured Light
Author: YangLin
Tutor: XuZengPu
School: Tianjin University of Science and Technology
Course: Mechanical Manufacturing and Automation
Keywords: 3D Measurement Hand-held Multi-angle Dynamic Calibration Low Cost
CLC: TP391.41
Type: Master's thesis
Year: 2009
Downloads: 181
Quote: 0
Read: Download Dissertation
Abstract
|
With the rapid development of science and technology, the research on intellectual and non-contact 3D measurement technique has attracted more and more concern. The 3D measurement technique based on laser structured light is more mature. However, the system’s cost is higher because of higher accuracy mechanically-driven device, so it is difficult to apply in some fields. Aiming at mentioned questions, the research on hand-held structured light laser for 3D measurement is proposed in the thesis. The higher accuracy mechanically-driven device is not necessary in this system, so its cost is lower.The focus of the thesis is on the key technologies of 3D measurement method and system construction. The main works are as follows:(1) A 3D measurement system without mechanically-driven device and with hand-held laser to measure surface profile of object is developed. Because this system is based on line structured-light, and it is a video collection, the whole 3D information of the object’s profile can be acquired efficiently in a scanning process, and the problem of occlusion existing in general line structured-light measurement system is resolved.(2) Aiming at system characteristics, a facilitated calibration method of laser plane is proposed. Only two reference targets are used to finish laser plane dynamic calibration.(3) Aiming at the measuring approach in the thesis, the surface profile of 3D object may be measured with the moving structured light laser and camera, and the surface profile of 3D object can be reconstructed.(4) Based on the system operational principle, the functional modules of system software are accomplished with Matlab, and the principle of each module is described. The experimental results prove that method is correct.(5) The accuracy of the measurement system and the main strategies related to improving its performance have been analyzed.
|
Related Dissertations
- Research and Implementation on Multi-angle Face Detection Technology Based on Continuous Adaboost Algorithm,TP391.41
- The Present Situation Investigation and Design Research of Low-rent Houses in Wuhan,TU241
- Software Approach to Implement Power Optimization in Embedded Handheld Mobile Gis Device,TP311.52
- An Analysis on Low-rent House Policy under the Perspective of Public Policy,F293.3
- China’s Low-cost Housing Security in the Legal System of REITs Construction,F293.3
- Study on the Competitive Stratgy of Hongdi Company,F426.71
- The Research on Low Cost Operation Pattern of China’s Airline Company,F562
- Low Cost Solution for Product Development in EN Company,F272.3
- Based on visual real ray tracing vegetation structure model parameter sensitivity analysis,TP79
- Douglas Kellner & British Cultural Studies,G156.1
- The Research of Low-cost Housing on Site Selection and Architectural Design,TU241
- Changsha City housing security system research,F293.3
- Financial Policy Research on the Consummation of the Urban Housing Guarantee of Our Country,F293.3
- Study of the Housing Security System of Middle-low-income Citizens in China,F293.3
- Research on the Mainstream Terminal Morphology of the Future,G206
- Study on Remote Sensing Technology for Colorado Potato Beetle Monitoring,S435.32
- Handheld electric vehicle control system design and implementation programmer,U469.72
- The Appliced Researeh on Low Cost Operating Mode of China Airlines,F562
- Zijiang Enterprise Low-cost Capital Expansion Strategic Analysis and Countermeasures Study,F275
- China's urban housing security system in the study of low-income families,F293.3
- Rresearch on City "Sandwich Layer" Crowd Housing Security Problems,F293.3
CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Information processing (information processing) > Pattern Recognition and devices > Image recognition device
© 2012 www.DissertationTopic.Net Mobile
|