Dissertation > Excellent graduate degree dissertation topics show

Research on Control of the Four-Rotor VTOL Helicopter

Author: WanDeWang
Tutor: ChenPing
School: Harbin Institute of Technology
Course: Electrical Engineering
Keywords: Four-rotor VTOL helicopter Loop shaping control Motor drive Real-time simulation
CLC: TP273
Type: Master's thesis
Year: 2008
Downloads: 311
Quote: 0
Read: Download Dissertation

Abstract


Compared with single-rotor helicopter, the four-rotor VTOL(vertical take-off and landing)helicopter has smaller propellers, which can reduce the risk of crashing into the surrounding objects. o it can make the flight safer. In addition, the thrust produced by four propellers can realize flight vehicle’s circling in static state better comparing with that of single propeller, and can change its posture in the hovering condition instantly.It also has good mobility and the effective supporting capacity. Gradually it was highly valued by the people in controlling and commercial domain. The article establishes the dynamic model of the four- rotor VTOL helicopter. Specific to the built model, we design H_∞loop shaping controller, simultaneously set up the physical platform, and carry on semi-physical simulation on the RTW environment.Firstly we determine the design proposal of the four-rotor VTOL helicopter in the article. The four-rotor VTOL helicopter has four inputs and six outputs, therefore it is a underactuated control system. Moreover the four-rotor VTOL helicopter makes the lifting force changed by changing the propeller speed, which causes the instability of its power.Therefore we need to have the stable inverse amplification factor to guarantee its stabilized flight.The H_∞loop shaping can combine the robustness merits of the classical frequency domain and the state space methods of the modern control theory, so we select H_∞loop shaping method to design flight controller. In order to design the controller,firstly we establish its non-linear model and carry on the linearization to the model, then through the Matlab simulation, confirm the control effect of the H_∞loop shaping controller we designed.Next, to determine the actual model parameter, we design the drive circuit for-four propellers, and then set up the entire physics platform.Finally, we construct the real-time emulation environment, and determine the electrical motor parameter and the system moment of inertia, obtain the model of the actual object and carry on the real-time simulation to system roll channel, confirm the controller’s effect.

Related Dissertations

  1. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  2. Research of Visualization Technology in the Virtual Test of Missile,TP391.9
  3. Research of Visual Servoing in 4-DOF Robotic Manipulator,TP242.6
  4. Application and Research of Dual Control in Vertical Landing Aircraft,TP273
  5. Research and Design on Performance Improvements of Satellite Communication Earth Station Control Circuit Based on FPGA,TN927.2
  6. Based close to the feel of underwater micro robot servo control study,TP241
  7. ASU pre-cooling system electrical control technology,TQ116.1
  8. Motor Drive Technology Research Based on SVPWM and Software PLL,TM33
  9. Design and Implementation of Virtual Practice Training Environment,TP391.6
  10. Research on Development of Real-Time Simulation Software for UAV,TP391.9
  11. The Model and Real-time Simulation Research for Replenishment Strategy of Deteriorating Items under Supply Chain Management,F274
  12. The Design of 3-Phase Hybrid Stepping Motor Driver Control System,TM383.6
  13. Design and Research of the direct-drive permanent magnet motor drive controllers based on the the PWM technology of screw pump,TM351
  14. Hybrid Electric Vehicle Electrical Control System Research,U469.72
  15. Research on Key Technologies of Real-Time Connecting in Distributed Battle Simulation Systems,E919
  16. The Research on the Model Founding for AS/RS and Motion Control for Stack Crane,TP273
  17. Study on Real-Time Simulation and Modeling of VSCF Wind Turbine Group System,TM614
  18. Research of General Relay Protection Platform for Experiments,TM774
  19. Simulation of the Dynamic Performance and Research on the Control and Optimization for the District Heating System,TU995
  20. Design and Rasearch of the Electric Control Suspension’s Hardware in the Loop Experiment Platform,U467.5

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile