Dissertation > Excellent graduate degree dissertation topics show

Study on Springback of High-Strength Steel Stamping

Author: CaoKeLi
Tutor: XingZhongWen
School: Harbin Institute of Technology
Course: Mechanical Manufacturing and Automation
Keywords: high strength sheet steel stamping part numerical simulation springback die surface compensation methods
CLC: TG386
Type: Master's thesis
Year: 2008
Downloads: 191
Quote: 2
Read: Download Dissertation

Abstract


Springback is one of three main defects and also the most difficult to control. The existence of springback will affect the shape, size, precision and surface quality of the part. Springback problem becomes more impressing, especially with the wide use of the high strength sheet steel in the automobile body manufacturing. There are great differences between high strength steel and low carbon steel. High strength results in decreasing plasticity, poor formability, whereas improving yield strength will lead to surface aberration, obvious springback and unstable shape. So springback problem is both a problem that exists in the industry and a hotspot that the academia has paid attention to for a long time.Firstly, illustrates the key technology of the numerical simulation theory of blanks forming in details based on a great deal of overseas and domestic technical information.Secondly, it analyzes the reason of springback during the process of the blanks forming and introduces the way of constructing models and computation methods in the research of springback. It also analyzes the factors which affect springback forecast.Thirdly, the mechanics and finite element model of curvy flat hull part is founded and blank holder force, friction coefficient, the effect of thickness, and drawbeads on springback is analyzed. it introduces some ways to control the springback. And the simulation results and die surface compensation methods are used to control the springback. Then it obtains a good result in controlling the springback of other parts by using the research conclusion.Last but not the least, orthogonal experimental methods are used to study the impact of the various factors on springback, and then the reasonable value parameters are determined and verified by experiment.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  3. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  4. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  5. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  6. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  7. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  8. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  9. Numerical Simulation of Biomass Direct Reburning,TK16
  10. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  11. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  12. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  13. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  14. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  15. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  16. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  17. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  18. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  19. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  20. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Cold stamping ( sheet metal processing) > Cold stamping process
© 2012 www.DissertationTopic.Net  Mobile