Dissertation > Excellent graduate degree dissertation topics show

Rotary ultrasonic machining vibration system research

Author: LiGuiHua
Tutor: ZhangXiangHui
School: North China University of
Course: Mechanical and Electronic Engineering
Keywords: Ultrasonic vibration system One-dimensional longitudinal vibration theory finite element analysis four-pole network method
CLC: TG663
Type: Master's thesis
Year: 2010
Downloads: 290
Quote: 6
Read: Download Dissertation

Abstract


Hard brittle materials (such as ceramic, glass, precious stone, carbon fiber, etc.) with high hard brittle and low facture toughness characteristic make conventional processing methods questionable that being used for rotate ultrasonic machining. For example, low precision, poor performance, low efficiency and high cost. It is urgent to find high-precision, high efficiency, low-cost processing methods and the rotary ultrasonic machining method with a good performance is adopted in the circumstances. It is a compound processing method with high-speed rotation around its axis which combines the fine cutting performance of diamond material and the supersonic vibration of the tool-bar. It demonstrates great advantages in the processing of hard brittle materials. This paper focuses on one of key technologies of rotary ultrasonic machining——ultrasonic vibration system. The paper mainly includes the following parts:First, the characteristics and advantages of rotary ultrasonic machine are described; also the state of domestic and foreign rotary ultrasonic machine tool and ultrasonic vibration system are described. And the composition of ultrasonic vibration system is briefly introduction.Second, the major part of this paper is design, analysis, simulation and optimization of rotary ultrasonic vibration system. Rotary ultrasonic vibration system is designed based on one-dimensional longitudinal vibration theory that it is suitable for rotary ultrasonic machine tool. Ultrasonic vibration system includes two parts:the sandwich piezoelectric ultrasonic transducer and the tool bar. And the design dimensions are approximately obtained by applying analytical method. The natural frequency and resonant modes are gained by means of modal analysis and harmonic analysis of ultrasonic transducer, tool bar and the entire ultrasonic vibration system with finite element analysis software ANSYS. Optimization of the ultrasonic transducer is completed via applying APDL, and amplitude of tool face is bigger. Moreover, The performance analysis of ultrasonic vibration system is completed by applying the four-pole network method, and all kinds of performance indexs are gained.Finally, the main performance parameters of ultrasonic vibration system are test by applying the dynamic analyzer. The results show that the parameters meet performance index. The deviation of resonant frequency is only 0.38%. Then the ultrasonic vibration system is installed in rotary ultrasonic machine tool. Drilling and simple processing of three-dimensional surface are implemented. Experimental results show that the vibration system has a high processing efficiency and good processing precision.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  8. Sham hose drum drive means and hydraulic system of the structure,TE973
  9. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  10. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  11. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  12. Study on Virtual Simulation Technology of Safety Valves Based on SolidWorks,TH134
  13. Al Wire Bonding Failure and Automatic Optical Inspection on Power Device Leadframe,TG441
  14. Finite Element Analysis of Seismic Performance of Rc Beams Composite Strengthened with CFRP and Steel Plate,TU352.11
  15. The Research on the Design of Magnetostrictive Negative Stiffness Damper,TU311.3
  16. Three-dimensional angle interlock woven composites mechanical properties of low-velocity impact and Finite Element Analysis,TB332
  17. Large-scale structure of spiral bevel gear milling machine static and dynamic performance analysis,TG547
  18. Hydraulic cylinder test bench loading platform Finite Element Analysis,TH137.51
  19. Pipeline Leakage Detection Technology within the magnetic axis,TH878.3
  20. Double skin steel tubular column partial pressure mechanical properties,TU398.9
  21. 30MN hydraulic support structure and the analysis of test stand,TD355.4

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Special machine tools and processing > Ultrasonic machining machine tools and processing
© 2012 www.DissertationTopic.Net  Mobile