Dissertation > Excellent graduate degree dissertation topics show

Improvment and Application of the Finite Elemet Simulating Model of Sucker Rod

Author: WuChangJie
Tutor: DongShiMin
School: Yanshan University
Course: Mechanical Design and Theory
Keywords: Sucker-rod Contact area Contact press distributed press Wear Oiltube Simulation
CLC: TE933.2
Type: Master's thesis
Year: 2010
Downloads: 307
Quote: 3
Read: Download Dissertation

Abstract


Sucker rod is the most important tool in the system for rod pumping. The real well track is a spce cure in straight well and controlled directional well.While the sucker rod moving in the well, the rod would frict the oil tube, because the rod bears much press and is stricted by the well trace. And this reduces the life of rod, even will cause rod-break accident in worst. So it is very significant for directing the optimizing design of decreasing the friction to researching the flexural law of sucker rod and forcasting the contact area and pressure and rate of friction between rod and tube. As the above-mentioned, the works are as followed:(1)Study in depth the simulation model of enviroment load of sucker rod. Improved and developed the mechanical analysis and simulative software for flexural deform of sucker rod. It includes all that: Builded the simulation model of pressure in pump and loading of pump.It considered the infulunce caused by the flowing of oil-gas-water mixture. Considered the axial vibration of sucker rod,build the realistic model. Builded the new method of auto dividing elements with the help of real structure of sucker rod. Raised the iterat method of rigid of elastica elements. All of these speed up the rate of simulation and reduce the duration from 30~90 minitues for one well to less than 5 minitues for one well.(2)Based on the simulative result of displace and pressure of node on rod, build up the simulative model of contact-area model and distributed pressure between rod and tube. Found the optimize model including unknown parameter. It provides the foundation for researching the friction rate between the sucker rod and oil tube.(3)Use the theory of tribology and based on concrete structure of rod, build up wear-efficiency model as the contact area and distributed press are known between rod and tube. Certain the maxium wear limit with the help of checking the residual intensity of worn rod and build up the forcasting model of rod under the practice operational mode. (4)Develop the software called mechanical analysis software of sucker-rod with the Visual Basic 6.0 programe language.It not only can judge the contact situation of sucker-rod and oil tube,but also can prescribe the contact area and forcast the life of sucker-rod. It will be very useful in oil field production.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  4. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  5. Optimizition of Compositions and Processing Parameters and Wear Properties of Cemented Carbides YG11R Modified by Nanosized Rare Earth,TG135.5
  6. Study on Springback of High-Strength Steel Stamping,TG386
  7. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  8. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  9. EDM Electrode Wear Mechanism and Control Research,TG661
  10. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  11. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  12. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  13. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  14. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  15. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  16. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  17. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  18. Numerical Simulation of Biomass Direct Reburning,TK16
  19. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  20. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  21. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173

CLC: > Industrial Technology > Oil and gas industry > Oil machinery and equipment and automation > Oil and gas production machinery and equipment > Pumping mechanical equipment > Sucker rod
© 2012 www.DissertationTopic.Net  Mobile