Dissertation > Excellent graduate degree dissertation topics show

Study on D-β-hydroxyisobutyrate Acid Synthetic Technique by Whole-cell Catalysis

Author: ZhangYunJiao
Tutor: ZhangXiaoLi
School: Northwestern University
Course: Chemical Engineering
Keywords: Candida rugosa D-β-hydroxyisobutyrate methacrylic acid reaction and extraction coupling technology
CLC: TQ225.12
Type: Master's thesis
Year: 2010
Downloads: 101
Quote: 1
Read: Download Dissertation

Abstract


D-(3-hydroxyisobutyrate (DHIBA) is the key intermediate for synthesis of captopril, and is also the important raw materials for vitamins, spices and antibiotics. As far as the biocatalysis of DHIBA be concerned, there are some advantages with raw material supplied easily, without separation and regeneration for coenzyme, disusing the separation for intermediate product. The purpose of the present work is to impove yield of DHIBA,the Specific method adopts candida rugosas to synthesize.At the same time, the preparation of biocatalyst,the selectivity of substrats, optimization of fermentation condition and use of reaction-Extraction technology are investigated.Due to the catalytic activity of Candida rugosas thalli for the important effects of DHIBA synthesis. In the experiment, the way of dilution coating plate was adopted to naturaly select microbial strains,and high active strain was obtained.The results showed that it is remarkable influence for thalli growth and DHIBA synthesis with different conversion substrates.the growing ability of thalli in culture medium including IBA is greater than culture medium including MA.However,the thalli for DHIBA synthesis with MA as substrate is more effective than with IBA as substrate.when concentration of IBA and MA in culture medium are 20g/L,cultured for 96h and the concentration of DHIBA is 3.98g/L and 4.56g/L respectively.Makeing use of MA as substrate to synthesize DHIBA in comparison with IBA as substrate,It can be got more fast response and high yield for DHIBA.Taking advantage of single factor experiment method to optimize reaction conditions,the adaptable initial reaction conditions was acquired. The results showed that the concentration of MA is lOg/L, concentration of glucose is 30g/L, pH 7.5, reaction temperature is 28℃and cultured thalli for 120h,the thalli biomass and the yield of DHIBA are both the best, right now the concentration of thalli is 13.23g/L and DHIBA reachs 4.99g/L.By means of response surface methodology analysis to further optimize reaction conditions, the optimum reaction conditions was determined.The optimum reaction conditions included that the concentration of MA is 13.62g/L, pH 7.57, the concentration of Glu is 33.22g/L, Cultured for 120h, the thalli biomass is15.64g/L and DHIBA reachs 4.99g/L.Using in situ reaction and extraction coupling technology to impove the DHIBA synthesis,the different extraction system for the effect of the growth of thalli and DHIBA synthesis was observed.The results showed that oleyl alcohol and trioctylamine (TOA) as extraction system is better.By way of optimizing experimental conditions, the optimum extraction conditions is attained. when pH is 5.8,the ratio of organic phase and water phase is 1:5,the content of TO A is 40%,cultured for 120h, the concentration of thalli can be got 11g/L and DHIBA reachs 4.45 g/L.The generated DHIBA is extracted immediately,and is not further oxidized and decomposed. The in situ reaction and extraction coupling technology simplifies the process of DHIBA synthesis,and heighten the yield of DHIBA.

Related Dissertations

  1. The Influence of Dynamic High Pressure Microfluidization on Activation and Conformational Changes of Lipase,Q55
  2. Production of 3-Hydroxypropionic Acid in Both Fermentation and Two Stage Mixed-culture,TQ922.9
  3. The Synthesis, Properties Study and Computer Simulation of Polymers Based on N, N-diethylacrylamide,O631.3
  4. Based trimethylolpropane monoesters of maleic acid, long chain branched polymers of the filling material retanning leather,O631.3
  5. Immobilized yeast in beer fermentation and its application,TS262.5
  6. Studies on the Preparation and Application of the Chitosan-MAA Radiation Graft Copolymers,TQ316.6
  7. Synthesis of Two Functional Polymers by ATRP,O631.5
  8. Fluoropolymer-based norbornene derivative and poly atom transfer radical polymerization proton exchange membrane,TM911.4
  9. Two kinds Tribenuron molecularly imprinted polymer membrane and its properties,O631.3
  10. Based on the four-arm star PEO Triblock Copolymer,O631.3
  11. Studies on Adsorption and Surface Imprinting Toward Lysozyme Based on Microsphere HEMA/NVP Grafting Polymerization of Methacrylic Acid,O631.3
  12. Study on Preparation of RE/Polymer X-ray Shielding Composites,TB332
  13. Novel poly N-isopropyl acrylamide copolymer and IPN hydrogels Preparation and properties of,O633.2
  14. Preparation, Characterization and Bioapplication of Multifunctional Organic/Inorganic Polymer Microspheres,O631.3
  15. Preparation and Application of Novel Polymer Monolithic Capillary Columns in Pressurized Capillary Electrochromatography,O657.8
  16. Study on the Catalytic Characters in Form of Cross-linked Enzyme Crystals,O621.3
  17. Preparation of Coupled Semiconductor Supported Metal Materials and Their Photocatalysis Behaviors for the Reaction of CO2 with C3H6,O643.32
  18. Environment-sensitive Interpenetrating Polymer Network Hydrogels Based on Silk Sericin for Drug Controlled Delivery,TQ460.1
  19. Studies on Poly(Methacrylic Acid-co-Poloxamer) Hydrogels,R943
  20. Synthesis and Characterization of pH and Electrical Responsive Hydrogels,O631.3
  21. Preparation and Infrared Performance of Multi-phase Change Temperature-microcapsule,TB34

CLC: > Industrial Technology > Chemical Industry > Basic Organic Chemistry Industry > The production of aliphatic compounds ( acyclic compounds) > Aliphatic carboxylic acid and its derivatives > Fatty acids and their derivatives > Saturated monobasic acid
© 2012 www.DissertationTopic.Net  Mobile