Dissertation > Excellent graduate degree dissertation topics show

The Design of Center-Controller Node in Electric Vehicle Based on CAN-BUS and the Realization of Protocol

Author: SunYunZuo
Tutor: ChenYanHong
School: Jilin University
Course: Precision instruments and machinery
Keywords: Pure electric cars Master controller CAN bus SAE J1939
CLC: TP273
Type: Master's thesis
Year: 2010
Downloads: 451
Quote: 6
Read: Download Dissertation

Abstract


In pure electric car , the main controller is the core of the entire control system to play a global role in the vehicle control system . The main controller node and master controller core components , it is responsible for the master controller and control unit , the transmission of information between the implementation of the device , its performance has a direct impact on the effect of the control of the entire control system . Therefore, the development of a pure electric vehicle owners fully functional controller node is the essential tasks in the process of vehicle control system products . Pure electric cars , each node communication using CAN communication network , in order to achieve a smooth communication between the various nodes , but also need to complete the design of communication protocols for pure electric cars . The paper around the main controller node to commence the study protocol design and pure electric vehicles . Controller node to a pure electric vehicle owners for the study, and after a lot of analysis and research is in progress , the completion of a pure electric vehicle owners based on CAN bus controller node hardware design and software design work to complete the match , and hardware design . SAE J1939 protocol based on a pure electric vehicle communication protocol design , and design communication protocol for pure electric cars , and CANoe software protocol emulation , and verify the reasonableness of the design protocol .

Related Dissertations

  1. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  2. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  3. Study on the Locomotive Dynamic Supervision System,U284.48
  4. The Inductive Load Based Vehicle Body Network Control System,U463.6
  5. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  6. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  7. Research on High-Performance Computer I/O Bus,TP336
  8. Development of High Speed Data Acquisation and Playback Module Based on PCI Express Bus,TP274.2
  9. Development of the Digitizer Based on PCI-E Bus,TP274.2
  10. Design of LXI 1553B Bus Communication Module,TP273
  11. Design of the Main Controller in Automotive Body Network Control System,TP273
  12. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  13. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  14. Research and Design of Web Reports Based on Service-Oriented Architecture,TP393.09
  15. Reform of the civil service positions Consumption,D630
  16. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  17. Application of AWG in Decoy Protection Equipment,TN97
  18. The Study on Site Selection Methods about Bus Transfer Hub at Cross-Harbor Tunnel in Qingdao,U491.17
  19. The Study Intelligent Pressure Transmitter Based on Hart Protocol,TP212.6
  20. Research on Bus Collision and Rolling Simulation Technology,U467.14
  21. The Design and Implementation of Medical Treatment Calling System Based on CAN Bus,TN99

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile