Dissertation > Excellent graduate degree dissertation topics show

A Study on Extend the Lifetime of the Inner Surface of Drill Pipe Processing Technology

Author: WangZuo
Tutor: WangXinHu
School: Xi'an University of Petroleum
Course: Materials Processing Engineering
Keywords: corrosion fatigue failure analysis coating coating assessment
CLC: TE921.2
Type: Master's thesis
Year: 2010
Downloads: 173
Quote: 0
Read: Download Dissertation

Abstract


The drill steel G105 was selected as the research object, the corrosion fatigue behavior of the drill steel G105 was investigated in detail, the coating process was probed, and the coating’s properties were evaluated preliminary, the requirement of preventing the corrosion fatigue on the inner surface of drill pipe was achieved.Based on the theoretical analysis, macro and micro analysis of the fractures of drill pipe were done by different experiments, and physical and chemical properties of materials of the drill pipe were studied in depth. The results show the failure behavior of drill pipe belongs corrosion fatigue which is caused by oxygen. The corrosion product of G105 drill pipe on the inner surface is analyzed by X-ray diffraction, and then the corrosion product is a mixture of several oxides containing Fe. the corrosion products is porous and loose, and adhesive ability is poor, corrosive media can pass through this film easily, thereby failure occurred. In addition, the oxide, sulfide reduces the impact toughness of the steel drill pipe and promoteds the expansion of corrosion fatigue crack. The corrosion fatigue properties of material are deteriorated result in premature failure of drill pipes.The internal coating is proposed as a preventive measures to corrosion fatigue, and the coating process is explored, shot peening is used as the pre-treatment process of inner surface of drill pipes, afterwards, the high pressure and airless spray is used to prepare the coating; the performances of the coating are measured by a series of experiments. The results show that the coating with a best thickness can improve the resistance of corrosion fatigue, and the service life of drill pipe can be increased greatly.

Related Dissertations

  1. Preparation of Micro-Arc Oxidation Ceramic Coating on Mg Alloy and the Research of Galvanic Corrosion,TG174.453
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. LSGM electrolyte thin films and electrochemical properties of,TM911.4
  4. Research on PSA/Cotton Blend Fabric of Coatinging of Water Resistance and Moisture Permeability,TS195.6
  5. The Effect of Tungsten on Microstructures and Properties of Wear Resistant Overlays Prepared by Plasma Cladding,TG174.4
  6. Optical Parametric Oscillator and Its Frequency Doubling to Achieve Three Primary Colors RGB Solid-state Lasers,TN248
  7. Preparation and properties of silicone modified waterborne polyurethane coating agent,TS195.2
  8. The Tin Coating Discoloration and Solderability Study in Lead Frame,TN305
  9. The Manufacture and Properties Studies of PTFE Architectural Membrane Structure Materials,TU599
  10. Modification of Polyurethane Acrylates Coating with Cycloaliphatic Epoxy Resins,TQ630.4
  11. Design and Optimize of LED Packaging Process,TN312.8
  12. Research on Bacterial-Cellulose Coating Small-Caliber Artificial Blood Vessel,TS106.67
  13. Study on Ultrasonic Testing Technology for Motor Bolt in Service,TM31
  14. Study on the Application of Waterborne Two Component Polyurethane Construction Coating,TU56
  15. Design and Properties of Heat-Insulating Materials,TB34
  16. Research on Modifying of Wood Surface Properties by Silicon Dioxide,TS652
  17. Ti / RuO 2 -IrO 2 -SnO 2 -Sb 2 O 5 Preparation and Application of anode,X703
  18. Core-shell nano metal powders and micro- preparation device developed,TB383.1
  19. Medical magnesium alloy surface laser cladding Zr 60 Ti 6 Cu 19 Fe 5 Al 10 amorphous coating,TG174.44
  20. Soluble polyimide UV coating applied research,TS195.2
  21. The Analysis of Interface Macrostructure of Thin Coating Material and Its Related Elastic Mechanical Behavior Based on AFM.,O484.2

CLC: > Industrial Technology > Oil and gas industry > Oil machinery and equipment and automation > Drilling machinery equipment > Drill bits,drilling tools > Drilling tools
© 2012 www.DissertationTopic.Net  Mobile