Dissertation > Excellent graduate degree dissertation topics show

New embedded memory module study

Author: LiaoQiHong
Tutor: YuHuiHua;LinYinYin
School: Fudan University
Course: Microelectronics and Solid State Electronics
Keywords: Embedded memory Resistive Random Access Memory Embedded Logic RAM band-gap PLL charge pump process corner temperature
CLC: TP333
Type: Master's thesis
Year: 2011
Downloads: 48
Quote: 0
Read: Download Dissertation

Abstract


In recent years, the concept of Internet Of Things had been proposed and promoted rapidly. It is partly due to people’s increasing purcuit of more convenient life. Besides, the rapid development of microelectronics technology contributes a lot to the promotion of the technology of Internet Of Things. On the other hand, the development of it asked for higher requirments on the performance of embedded memory. The traditional embedded memory had many limits in many aspects such as scaling-down, cell size, speed, power consumption and chip density.The next generation of embedded memory can be divided into three categories:high-speed embedded non-volatile memory, low power embedded non-volatile memory and embedded DRAM, respectively, for different applications. Research for new memories is mainly focused on the development and improvement of the storage cell, storage structures and storage media. Besides, others will focused on how to achieve basic reading and writing functions, the further realization of memories’ high-speed, low power, high density or other characteristics.This thesis is concentrated on memory circuits design. In this thesis, three power supply schemes is proposed according to laboratory’s memory materials characteristics, which are suitable for three different memory application. In addition, a PLL is designed for the high-speed embedded DRAM to create a stable clock which might be used to facilitate the functional verification and adaptive testing. ALL the circuits proposed in this thesis are designed custom for new RRAM and eDRAM.

Related Dissertations

  1. Preparation and Electrocaloric Effect of BaxSr1-xTiO3 Ferroelectric Thin Films,TB383.2
  2. Measurement of the Surface Impedance of the High Temperature Superconducting Thin Films with Coplanar Transmission Line,O484.5
  3. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  4. Research on Temperature Measurement Technique Based on CCD Image Sensor,TH811
  5. Development of Explosion Flame Temperature Measurement System Based on Multi-Spectral Thermometry,TH811
  6. Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes,V241.5
  7. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  8. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  9. Research on Nozzle Plume Temperature Distribution Measurement System,V434
  10. Numerical Analysis of Flow Process in a Molten Carbonate Fuel Cell,TM911.4
  11. Well Detection Pump Steady-Speed Driving System of Brushless DC Motor,TM33
  12. Experimental Research on Concretion Characteristics of High Temperature Syngas in Integrated Gasification Combined Cycle System,TM611.3
  13. The Basic Research of Axial Flux Inductor Type High Temperature Superconducting Motor,TM37
  14. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  15. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  16. Study on RFID Techniques in the Manufacture of Used in Automobile Ignition Coils,TP391.44
  17. Research on Millimeter Wave Imaging with Scanning Array,TP391.41
  18. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  19. Research on Temperature Control System for Laser Diode,TP273
  20. Design and Study of Temperature Chamber Control System in Servo Table,TP273
  21. Research on Temperature Control System for High-Performance Oven-Control Crystal Oscillator (OCXO),TN752

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Electronic digital computer (not a continuous role in computer ) > Memory
© 2012 www.DissertationTopic.Net  Mobile