Dissertation > Excellent graduate degree dissertation topics show

Design and Manufacturing of Bionic Polishing Pad and Research on Kinematical Analysis Base on Sunflower Seed Pattern

Author: DuanMin
Tutor: LvYuShan
School: Shenyang University of Technology
Course: Mechanical Manufacturing and Automation
Keywords: CMP Bionic Polishing Pad Material removal Rate Phyllotaxis
CLC: TN405
Type: Master's thesis
Year: 2011
Downloads: 9
Quote: 0
Read: Download Dissertation

Abstract


Chemical mechanical polishing (CMP) as a critical technology in integrated circuit (IC) manufacturing is widely used to achieve a high degree of the local or global planarization of the substrate silicon wafer. And the minimum resolvable feature size decreases and the silicon wafer siza increases in IC manufacturing. In order to ensure the degree of local or global planarization of silicon surface, researchers in various fields focus on the polishing pad and the movement of chemical mechanical polishing (CMP) and the material removal volume distribution (MRVD). But to solve this problem, it is very important to research the morphology of the pad and the movement mechanism, and it also very meanful to high-quality and high-precision silicon surface.This paper presents a new kind of polishing pad has been designed based on the phyllotaxis theory of biology. After analysis the problems of movement mechanism, focus on the trajectory and the material removal volume distribution (MRVD) of bionic polishing pad.Firstly, from the theory of single grinding trajectory, base on swing polishing machine, analysis the trajectory of different phyllotaxis parameter pad, and compared with ordinary polishing pad, concluded that when the revolution speed of the polishing platen n0=50 r/min and the central angle of arm a=15°and the swing speed of the swing shankθm=25°, the trajectory of bionic pad is ideal, and received higher degree of silicon surface.Secondly, the kinematical equation and the distribution model of material removal rate (MRR) have been established on the base of the cutting theory of single abrasive gain. With the help of those equation and model, the material removal volume distribution (MRVD) is calculated and analyzed. he effects of the movement parameters of polisher and the phyllotais parameters of polishing pad on the cutting trajectory and the MRVD are obtained. The results show that the uniformity of the dimensionless distribution of the material removal volume (DDMRV) on wafer surfaces can be improved when the revolution speed of the polishing platen is between 20 r/min and 30 r/min or large than 20 r/min, its center angle may large than 15°or equal to it, the swing speed of the swing shank may between 20°and 25°, the phyllotaxis parameters between 2.0 and 2.4. And the experimental results and theoretical simulation results are basically consistent.

Related Dissertations

  1. Study of Mechanical Vibration Aided Submersed Gas- Jetting Edm,TG661
  2. Design and Implementation of Multi Processors IP Core of Webit System Based on FPGA,TP332
  3. Synthesis and Chemical Mechanical Polishing Performance of Compound Cerium Oxide,O614.332
  4. Four-layer structure based on J2EE platform online banking system,TP311.52
  5. Research on Handset Application Development Based on BREW Platform,TP311.52
  6. Based on the platform of the uCLinux BlackFin dual-core extended and related problems,TP316.81
  7. Effect of Dummy Fill on Electric Character,TN405.97
  8. Research on Process Parameters Decision & Optimization for Function Ceramics in the Precision CMP,TG580.692
  9. Research on AVO Forward Simulation in Angle Gather and Nonhyperbolic Moveout Method,P631.4
  10. Research and Design of Cache Coherence for Multi-core Processors,TP332
  11. The Task Assignment and Algorithm Research on a Heterogeneous Multi-Core Processor,TP332
  12. Look Up Table Based Parasitic Capacitance Extraction Method for CMP Dummy Fills,TN405
  13. Research on Logistics Cost Control of CMP Northeast Representative Office,F253.7
  14. Synthesis, Characterization, and Catalytic Application of Chiral Pyrrolidine-Triazole Functionalized Materials,O626.13
  15. CMP cluster parallel programming model based Research and Application,TP338.6
  16. Comparative Observation of the Efficiency for Three Methods of Treatment of Knee Osteoarthritis,R684.3
  17. Embedded operating system for multi-core processors,TP332
  18. Multi-point test, the test controller directly improvement and experimental,TN915.06
  19. Research on Coordinated Multi-Point Concurrent Testing for Subnetworks & Relay Devices and Testing Experiments,TN915.06
  20. High Precision NMO and Stacking Technique Research and Application,P631.4

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Microelectronics, integrated circuit (IC) > General issues > Manufacturing process
© 2012 www.DissertationTopic.Net  Mobile