Dissertation > Excellent graduate degree dissertation topics show

Study on Composite Permanent Template and Its Application in Bridge

Author: HuangYongQing
Tutor: LiuShanHong
School: Chongqing Jiaotong University
Course: Bridge and Tunnel Engineering
Keywords: Composites Avoid demolition template Continuous Rigid Frame Bridge Template support system
CLC: U444
Type: Master's thesis
Year: 2010
Downloads: 74
Quote: 0
Read: Download Dissertation

Abstract


Related Dissertations

  1. Study on Characteristics of Contiuous Fiber-Reinforced Metal Matrix Composites under Hypervelocity Projectile Impact,TB332
  2. Preparation and Tribological Properties of TZ3Y20A-SrSO4 Ceramic Matrix Composites,TB332
  3. Reactive Hot-Pressing and Mechanical Properties of (ZrB2-ZrO2)/BN Composites,TB332
  4. Schiff base Synthesis, Characterization and Antibacterial Properties,O641.4
  5. Closed thin-walled beams composite modal damping prediction,TB33
  6. Carbon fiber reinforced epoxy resin surface treatment and interfacial properties of composite materials,TB332
  7. Synthesis and Visible Light-Driven Photocatalytic Performances of Silver Halide/Conducting Polymer Nanocomposites,TB383.1
  8. Reaction Sintering Preparation of Titaniferous Compound Ceramic Composites by Two-step Method,TQ174.1
  9. Preparation and Investigation on the Properties of Three-Dimensional Braided Quartz Fiber Reinforced Composites,TB332
  10. Studies on Damping Modification of Fiber Reinforced Composites,TB332
  11. Studies on Genotoxicity of Two Novel Contraceptive Materials,R114
  12. Large composite structures falling weight impact test technique,TB302
  13. Wood composite viscoelastic constitutive heat and thermal forming simulation study,TB332
  14. Preparation of Fe3O4-MWCNTs Nanocomposites by Microwave Assisted Polyol Method and Their MRI Enhancement Properties,TB383.1
  15. Research of Preparation Technology of High Performance and Low Cost Aluminum Composite Materials,TB331
  16. Fabrication of Microscale Ordered-reinforced Composite and Its Mechanical Characterization,TB33
  17. Composite materials by mechanical shear load connector pin load distribution of,V229.7
  18. Three-dimensional angle interlock woven composites mechanical properties of low-velocity impact and Finite Element Analysis,TB332
  19. Particle reinforced copper matrix composites mechanical behavior of finite element analysis,TB331
  20. Four -step braided composites under different stress levels bending fatigue behavior,TB332
  21. D braided composites bending properties of,TB332

CLC: > Transportation > Road transport > Bridges and Culverts > Bridge materials
© 2012 www.DissertationTopic.Net  Mobile