Dissertation > Excellent graduate degree dissertation topics show

Research on Cement Thickness Design of Continuously Reinforced Concrete Pavement

Author: YaoBo
Tutor: HeZhaoYi
School: Chongqing Jiaotong University
Course: Road and Railway Engineering
Keywords: Continuously Reinforced Concrete Pavement Load stress Thermal stress Crack analysis Cement thickness design
CLC: U416.216
Type: Master's thesis
Year: 2010
Downloads: 83
Quote: 1
Read: Download Dissertation

Abstract


Continuously reinforced concrete pavement (CRCP) is a kind of concrete pavement in which the longitudinal reinforcing steel is continuously throughout its length and has no intermediate transverse-expansion or contraction joints.Longer service life, better riding quality, less maintenance work and so on. It has widely used for arterial of highway and airport pavement in advanced countries such as the United States and European countries. The application and correlative study about CRCP is relatively late in our country. Some preliminary work has also been done in our country, but the theoretical study and construction technique is not perfect. The paper systematically studied the problems of transverse cracking, end movements and construction technique on the base of actual construction of CRCP experiment road.This article depends on the Guizhou Province transportation department technological project《The research of the constructs key technologies on the continuously refinorced concrete pavement》, carried out three dimensional finite element analyses with the consideration transverse crack. In the critical load position analysis ,carried out the compose of two critical load positions and five different loads positions. The two critical load positions are found out under the different length of transverse crack spacing一the central part in longitudinal joint and in the transverse crack of one side. Through a great deal of calculation for different load position, analysis of parameters, the relation of crack spacing and steel percentage is studied, and then analyzed CRCP with the purposes of proper design for slab thickness.In the Thermal stress analysis, the equilibrium differential equations are established for the analysis of the thermal stress in CRCP. Infers the Analytic solution conclusion of the Continuously reinforced concrete pavement. Then do the Contrastive analysis with the Finite element solution. Considered the influence of the different anchorage condition to the temperature stress and provided the mature theory basis for the CRCP Thermal stress analysis.In the crack analysis, established the crack computation model and the balanced differential equation, given the crack determination criterion. Lacks in view of the former research to the various parameters crosswise comparison, this article uses the relative comparison the method, through contrastive analysis, compared with different physical quantity various parameters to crosswise dehiscence influence sensitivity. Unified the fundamental research and the experimental road research, proposed the consideration crack factor’s thickness of slab design method, given the design standard flow and the design variable suggestion value. This design method can be used in the project practice.

Related Dissertations

  1. Rock-fill Concrete Experiments on Comprehensive Properties and Studies on Thermal Stress,TU528
  2. Ropgef Family Gene in Response to Abiotic Stresses and Expression at Different Tissues of Arabidopsis,Q945.78
  3. Evaluation of Films Creep Deformation Property by Laser Thermal Stress Method and Simulation of Finite Element,TN249
  4. Analysis and research of a number of issues in the design of building structures,TU318
  5. The Studies on Yb:YAG Direct Bonding Waveguide Laser by End-pumping of LDs,TN248
  6. Investigation of Thermal Design Technology for High-power GaAs Photoconductive Semiconductor Switches,TN36
  7. Numerical Study on Muti-fields Coupling for Different Types of Heat Exchanger Tubes with Inside and Outside Fluid,TQ051.5
  8. The Study of Particle Fouling Preventionand Cleanupin Vapor-Liquid-Solidmulti-Phase Evaporation Tube,TK124
  9. Thermal Field Analysis for Pot of 320t Torpedo Car with Finite Element Method,TF341.5
  10. Stress folds regularity and the realization of a large area of ??ordered structures,TB383.1
  11. Ceramic Theramal Sterss Cleaving Technology Based on Laser,TQ174.62
  12. Continuously reinforced concrete composite thickness of asphalt pavement structure,U416.217
  13. Finite Element Calculation on Cold Start-up Fatigue Life of 1025t/h Boiler Drum,TK227.7
  14. Study on Plane Thermal Stresses of Two-dimensional FGM Plate Based on FEM,TB34
  15. Study on Crystalline Morphology of PET Fibers Filled iPP Composites by Means of Polarized Optical Microscope,TB332
  16. Research on Testing Methods for Polarization Maintaining Fiber and Fiber Loop of Fiber Optic Gyroscope,V241.5
  17. Analysis of the Mechanical Cause of Longitudinal Cracking of Cement Concrete Pavements,U416.216
  18. Study on Simulation Analysis of Temperature Field and Thermal Stress for Bituminous Pavement Structure,U416.217
  19. Optimized Structural Design and Basic Manufactural Study of Ceramic Extrusion Die,TG76
  20. Electrostatic probe complex boundary conditions in the plasma thermodynamic simulation,O53
  21. Numerical Simulation of Die Casting Process for A-alloy Cylinder Block of Automobile Engine,U464.13

CLC: > Transportation > Road transport > Road works > Roadbed, pavement engineering > Pavement Engineering > Road : use of the material points > Cement concrete pavement
© 2012 www.DissertationTopic.Net  Mobile