Dissertation > Excellent graduate degree dissertation topics show

Research on Technology of Surrounding Rock Controlling and Supporting in Fully-mechanized Caving Roadway

Author: MaoJiuHai
Tutor: WangXiaoLin
School: Xi'an University of Science and Technology
Course: Bridge and Tunnel Engineering
Keywords: Fully-mechanized caving method Gob-side entry driving Surrounding rock controlling Numerical simulation Bolt-mesh-cable supporting
CLC: TD353
Type: Master's thesis
Year: 2008
Downloads: 680
Quote: 7
Read: Download Dissertation

Abstract


The application of gob-side entry driving became more and more important in fully-mechanized caving in order to enhance coal percentage extraction. The design of the rightness position for gob-side entry driving and effective supporting method have been turned into the key technology which was used to co control the stress and ensure the stability of surrounding rock along caving roadway.Based on the engineering background of 21053 work face in the Shi Tan Jing second Coal Mine of Shenhua Ningxia coal company, the problems of coal pillar designing, laneway excavating and supporting are discussed in the paper. The stability of the surrounding rock along fully-mechanized caving roadway and its controlling technology are studied by using the methods that synthesizing project analogy method, theoretical computation, field experiment and numerical simulation.The effect to stability of the surrounding rock along caving roadway, which produced by pillar width and supporting parameter ,has simulated and studied respectively in the process of laneway driving using FLAC-3D. The distribution of confining pressure which caused by mine stope was discussed. The distribution of stress in surrounding rock during the laneway driving and caving has been obtained. The extension of plastic zone has been used to appraise the stability of pillar during laneway driving. Based on the anomalous pillars, it also analyzed the safety, driving speed, support intensity and cost etc, and choosed the reasonable pillar width as 8m. The effect to stress, deformation and plastic in surrounding rock, which caused by the supporting, has been analyzed by using the orthonormal numerical simulation. And the force and failure mechanism of the cables have been studied, too. It also designed the bolt-mesh-cable supporting for the laneway in 21053.By contrasting the data of numerical simulation and field experiment, It analyzed the stability of the surrounding rock and its destroyed modality. It was scientific and effective that controlled the surrounding rock in fully-mechanized caving roadway by laneway layout study and bolt-mesh-cable supporting. The conclusion could be used in the similar project.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Mining Engineering > Mine the pressure and support > Mine support equipment > Roadway support
© 2012 www.DissertationTopic.Net  Mobile