Dissertation > Excellent graduate degree dissertation topics show

Deep-sea mining vehicle speed control research

Author: TuShuBai
Tutor: GuoShuJuan
School: Central South University
Course: Mechanical and Electronic Engineering
Keywords: Seabed mining vehicle motion control simulation synchronization control fuzzy control
CLC: TD424
Type: Master's thesis
Year: 2008
Downloads: 75
Quote: 3
Read: Download Dissertation

Abstract


Seabed mining vehicle is hydraulic drive, low speed and tracked, which runs along s-shaped path. Because of the unknown and complicated environment, uneven and extra soft seabed sediment, the vehicle works with high slip and big uncertain moving state change.Seabed mining vehicle hydraulic drive model is built in the thesis. Fuzzy PID controllers are also designed, of which the parameters are able to be adjusted online. The moving state equation of the vehicle is established. Propose the online calculating models of the key moving parameters. Finally, A principal and subordinate speed control system of the vehicle is presented and made a simulation.The main research achievements include:(1)Seabed mining vehicle hydraulic drive model is built and simulated by MATLAB/Simulink. Then, the frequency characteristic is analyzed.(2)Aiming at properties of high rank, high nonlinearity for the Seabed mining vehicle hydraulic drive system, fuzzy PID controllers based on MATLAB/Simulink is designed.(3)Establish the moving state equation of Seabed mining vehicle. In addition, the online calculating models of the key moving parameters such as slip rate and effective radiuses are proposed.(4)Put forward a control method for Seabed mining vehicle moving to targeted state. Based on this research, a principal and subordinate speed control system of the vehicle is presented and made a simulation.The research results of simulation show that with external disturb, Seabed mining vehicle can run straightly or swerve for the target in advance. The system can achieve the requirement of control precision.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  11. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  12. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  13. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  14. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  15. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  16. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  17. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  18. Numerical Simulation of Biomass Direct Reburning,TK16
  19. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  20. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  21. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173

CLC: > Industrial Technology > Mining Engineering > Mining machinery > Mining machinery > Seabed deposits and mining machinery
© 2012 www.DissertationTopic.Net  Mobile