Dissertation > Excellent graduate degree dissertation topics show

Rapid Calculation of Static Voltage Stability on the Power Systems after a Contingency

Author: ZhaoKeYu
Tutor: WuZhengQiu
School: Hunan University
Course: Proceedings of the
Keywords: power system static voltage stability saddle node bifurcation Newton’s method contingency analysis
CLC: TM712
Type: Master's thesis
Year: 2008
Downloads: 176
Quote: 1
Read: Download Dissertation

Abstract


In power market, in order to make the power system working more efficiently, electric network is often running close to the limit of state. In order to keep electric network running safely and stably, steady-state voltage stability of the electric network computing margin, and security and stability of the electric network after the accident occurred on is very important. This paper presents the method that can quickly calculate the static voltage stability margin after a branch outage contingency of the electric network. This method has enhanced the calculating speed so greatly that the power system is able to meet the needs of online computing. At last, verify the reliability and the practicability of the method with the C + + programming language. Specific work mainly concentrated in the following four aspects:(1) This paper first introduced the voltage stability of the basic concepts.the significance and the phenomenon of voltage stability, the classification voltage stability and voltage stability study’s history and status quo, the main methods of static voltage stability analysis are the main contents of this paper. A simple system model of a static analysis of voltage stability has been found.By studying the static voltage stability of a simple system, the paper clear some basic concepts of static voltage stability .Finally get some basic conclusions about voltage stability though a simple system.(2)Introduce the power system network calculation method in detail.Found a model to calculate the bifurcate point of the voltage stablility on electric power systems. Especially introduced the algorithm to get the bifurcate point of the voltage stablility with the continuous power flow method. And put the explanations on the problems (such as the choice of the continuous parameter,sensitivity, identify the critical point, the complementary application of the conventional and the continuous power flow, the different varying ways of load) which is probably occurred in the calculation with continuous power flow.(3)Two new algorithm is used to get the power system voltage stability margin after the contingency: SNB point of tracking curve method,using this method can get the feasible solution under the serious contingency of power system which can not get by using the conventional methods. The solution can be used in contingency evaluation and contingency defending. In addition, the prediction and calibration equation which is used to get the SNB point after the contingency can be solved with special matrix reducing techniques.By using this techniques can simplify the procedures designed and reduce the memory occupation; SNB points higher-order Taylor approximation method, the formula presented in this method to calculate the high-order sensitivity has good expression. Solution procedure of State variables and load margin for the high-order sensitivity are based on the same coefficient matrix, repeated factor table decomposing is not needed.Eigenvector of high-order derivative is not needed in this method. Calculation speed and high accuracy is the outstanding feature of this method.(4)Two methods have been used to calculate the result in the corresponding power systems, and the result proved the correctness of these two methods, and the advantages compared with the traditional method.

Related Dissertations

  1. Over-voltage Identification of Transmission Line Based on Hilbert-Huang Transformation,TM866
  2. Generator Excitation System of the Anti-saturation Control,TM301.2
  3. Research of Power System Reactive Power Optimization Based on Immune Ant Colony Algorithm,TP18
  4. Research on Support Vector Regression in Prediction of the Short-term Load of Power System,TM715;F224
  5. Research on Avoiding Disaster Mechanism of Small Independent Wind Power System in Marine Environment,TM315
  6. The Design of Dynamic Reactive Power Compensating Device and the Chaotic Analysis of Its Integration,TM761
  7. Research on Modification and Application of Particle Swarm Optimization Algorithm Based on Control Methods,TP301.6
  8. GPRS-based transformer fault diagnosis system,TM407
  9. Security and Stability Analysis of Shengli Oilfield Power System,TM712
  10. Explicit Model Predictive Control in Power Electronics and Power Systems,TM76
  11. Economical Operation and IRP/DSM Decision Support Research on Shengli Oilfield Power Grids,F426.61
  12. Small wind power generator control system,TP273
  13. Researches on Risk Assessment and Preventive Control of Static Voltage Stability of Power System,TM712
  14. Study of Dynamic Equivalent of Power System Based on Parameter Identification,TM712
  15. Research on Key Issuses of Network Loss Reduction for QinGPU Distribution Power GRID,TM714.3
  16. Microwave imaging technology and its inexact Newton algorithm,TN015
  17. ZigBee Technology-Based Temperature Measurement of the High Voltage Switchboard,TM591
  18. Short-circuit Isolate System in Distribution Network Based on Topology Division,TM76
  19. Research of Static Voltage Stability Analysis and Wide Area Control Strategy Based on the External Network Equivalence,TM712
  20. Application Research on a Stand-alone PV System with Ultracapaticor Battery Hybrid Energy Storage,TM912;TM53
  21. Uhvdc Transmission System Reliability and Its Influence on Ac Power Grid,TM721.1

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Theory and Analysis > Power system stabilizer
© 2012 www.DissertationTopic.Net  Mobile