Dissertation > Excellent graduate degree dissertation topics show

Rotor Position Estimation of Switched Reluctance Motor Based on Neural Network

Author: HanFeng
Tutor: XuBingZuo；BianDunXin
School: Shandong University of Technology
Course: Power Electronics and Power Drives
Keywords: SRM (Switched Reluctance Motor) BP Neural Networks Indirect Detecting Rotor Position Matlab/Simulink
CLC: TM352
Type: Master's thesis
Year: 2008
Downloads: 128
Quote: 0
Read: Download Dissertation

Abstract


Due to its simple construction, reliability, high efficiency and low cost, switched reluctance motor (SRM) has shown huge competitive power in many fields. But mechanical position sensors add to the cost, complexity and potential unreliability at high speed and this has motivated the investigation of sensorless position estimation. Because of its high nonlinear electromagnetism characteristic, the sensorless control based on accurate model of SRM is hard to be accomplished. In recent years, artificial neural network(ANN) technology has made a great progress, which gives a new method to accomplish position sensorless control of SRM.A novel indirect detecting method of SRM’s rotor postion based on BP(Back Propagation) neural network is presented in this paper. For the adopted network,the training data set is comprised of magnetization data of the SRM for which three-phase current and flux linkage are inputs and the corresponding position is the output, the BP neural network can build up a correlation among phase current, phase flux linkage and position, thereby facilitating elimination of the rotor position sensor.At the present stage, in order to ensure the forecast precision and the convergence rate of the neural network, the neural network’s training sample data is generally the electrical motor’s operation data under the specified condition which can not reflect the real running situation of the electrical motor. In view of this situation, this paper proposes a method based on training data real-time renewal, and introduces the idea to the input vector of neural network. In neural network’s training process, according to the real running situation of the electrical motor, takes the three-phase current, flux linkage and rotor position in different operation circumstances as training sample, to train the established neural network model in batches, until the network’s forecast precision tends to be stable and meet the requirement.The simulation results show that the improved BP neural networks proposed in the paper can realize SRM rotor position’s accurate prediction in case of different operation of the electrical motor,and realizing the motor’s control without position sensor. The neural network has high forecast precision, favorable dynamic characteristics, better adaptability and robustness.

Related Dissertations

  1. Designs and Applications of Fuzzy Synthetic Evaluation Models Based on Parallel Algorithms,TP18
  2. The Simulation Technology Study of Marine Gas Turbine Based on Modular Modeling,U674.703
  3. Stage Fault Diagnosis Based on Data Fusion,TP18
  4. Double- fed wind power generation system modeling and simulation,TM743
  5. Carpet foam machine hydraulic system and pump control cylinder speed control system,TS106.76
  6. The master-slave control hydraulic excavator Research,TU621
  7. Modeling and Co-simulation of the Electric Power Steerning System,U463.444
  8. Research on the Characteristic Simulation of Auto Hydro-pneumatic Spring,U463.33
  9. The Research on Development of Controller for EV PMSM Based on TMS320F2812,TM341
  10. The Study on Optimal Design and Fuzzy Control of Active Suspension in Vehicles,U463.33
  11. The Distance Protection Filtering Algorithm Studies of Ultrahigh Voltage Electrical Network,TM773
  12. Research on High-power Digital AC Servo System,TM921.541
  13. Reasearch on Technology of Vehicle Anti-Lock Electronic Brakeforce Distribution,U463.526
  14. The Research of the Technology of Vehicle Height Control,U463.33
  15. Spherical robot motion analysis and control,TP242
  16. Research on Four Wheel Steering Control Method and Experimental System Design of Model Vehicle,U463.4
  17. Hydro-Turbine Governing System Simulation and Analysis Based on MATLAB,TV734.1
  18. Reseach on Controlling Algorithm for Manipulator via Dynamic Model,TP242.2
  19. Based on SMIC 0.35um process Sigma-Delta ADC Design and Verification,TN792
  20. The Research on Pmsm Servo Control System Based on Dtc,TM341
  21. Optimal Control of Suspension and Simulation Analysis of Vehicle Ride Comfort,U463.33

CLC: > Industrial Technology > Electrotechnical > Motor > A special motor > Reluctance motor
© 2012 www.DissertationTopic.Net  Mobile