Dissertation > Excellent graduate degree dissertation topics show

Research on the impact point coordinate measurement method of passive surface acoustic positioning on the big target

Author: JiangDongDong
Tutor: DiChangAn
School: Nanjing University of Technology and Engineering
Course: Precision instruments and machinery
Keywords: Small-bore artillery Passive acoustic localization Big target face Standing target shooting concentration Impact location
CLC: TJ06
Type: Master's thesis
Year: 2011
Downloads: 82
Quote: 3
Read: Download Dissertation

Abstract


The standing target shooting concentration is an important index of the quality of ammunition, and is indicated with the impact location coordinate error. The thesis according to passive acoustic localization principle, studies a way of passive acoustic impact localization measurement of small-bore artillery which measurement area reaches 10m×10m. Lay the foundations of shooting concentration automatic measurement of standing target for Shooting Range.The basic conditions and features of shock wave of small-bore artillery are analyzed. Starting with the components of system and measurement principal of metallic bar type and dot array type, measuring precision and security for 10m×10m target area is analyzed. Dots array type which is more suitable for big target face, small volume measuring system is confirmed.The embattled way of acoustic sensor, the setting of mathematics model and calculating method of four dots quadrate array, eight dots linear array and symmetrical trigonal array was analyzed. By simulation analysis, the influence caused by time measuring error and acoustic sensor space to measuring precision and stability of three measurements was analyzed. The feasibility of three embattled models for 10m×10m target area measurement was probed into. Confirmed that symmetrical trigonal array is the embattled model satisfying study target.According to the requirements of a project of 25mm small-bore artillery, acoustic sensor embattling length than 2m and 10m×10m measuring target area, a passive acoustic impact localization automatic measurement system was designed.The system control software was programmed by LabVIEW and MATLAB which has the functions of system setting, waveform data acquisition and saving, data analyzing, etc. Seamless integration of LabVIEW and MATLAB was achieved by COM technology. The setup program was released.The system was testified in 1000m shooting lane of a shooting range by 25mm small-bore artillery. The precision reached 2cm.

Related Dissertations

  1. Point of impact detection system developed,TJ410.6
  2. Low-altitude target sound directional Method,TN911.7
  3. Design and Implementation of Projectile Falling Point Localization System Based on Acoustic Time-Delay Measure Technology,TP274
  4. Research on Data Acquisition and Processing Methods for Weapon Evaluation System,TJ06
  5. Research on Effectiveness Evaluation Methods of Weapon Systems,TJ06
  6. Quality Assessment of the Real-time Optical Measurement Data in Range Based on the Fuzzy Synthetic Evaluation,TJ06
  7. Ballistic missile target in a Gliding Range Design and Control System,TJ06
  8. N Development of wave signal processing module,TJ06
  9. Bayes test equipment based on the loss of statistical reliability of the design verification test,TJ06
  10. Model-based rapid test method equipment,TJ06
  11. Multifunction radar target system,TJ06
  12. Longitudinal Channel Controller Design of the Target Missile Aircraft,TJ06
  13. Fuze High Acceleration Pulse Width Property Test System (Electric Parts),TJ06
  14. Research on Light Transmitting Environment Modeling Technology for Virtual Test,TJ06
  15. Design and Realization of Launcher Integrated Test System Based on DSP and FPGA,TJ06
  16. Simulation Training System Research and Design for a Certain Type of Equipment,TJ06
  17. Researches on Key Technology of the Synthetical Electromagnetic Compatibility Testing System Based on Workflow,TJ06
  18. Design of Test Course and Devlopment of Control Software for Virtual Test System,TJ06
  19. The virtual shooting system software design,TJ06
  20. The Study for the Real-time Testing System Design of Remote Moving-Targets,TJ06
  21. Based on Processing Technology of Laser Designator Multi-parameter Test Software Design,TJ06
  22. Intelligent Target-scoring System Based on Ultrasonic Positioning,TJ06

CLC: > Industrial Technology > Arms industry > General issues > Testing technology and facilities
© 2012 www.DissertationTopic.Net  Mobile