Dissertation > Excellent graduate degree dissertation topics show

The Analysis of Vibration Frequency of Film Bulk Acoustic Resonators

Author: LiuJianSong
Tutor: WangZuo
School: Ningbo University
Course: Engineering Mechanics
Keywords: film bulk acoustic resonators layered plates thickness vibration frequency viscosity electrical circuit parameters
CLC: TB533
Type: Master's thesis
Year: 2009
Downloads: 40
Quote: 1
Read: Download Dissertation

Abstract


The wireless communication technology demands for RF components of smaller size, high frequency, high performance, low energy consumption, and low cost. Film bulk acoustic resonators (FBAR) are the latest technology offering RF components of small size and high frequency to the fast growing personal wireless communication technology.With the sophistication of the FBAR technology and demands for precision products, it is natural to make use of the full analysis of acoustic waves propagating in FBAR structures for design and calculating electrical parameters before the fabrication. Based on the justified assumption that the layered microstructure of FBAR can also be treated as infinite plates, vibration frequencies of the thickness-extension and thickness-shear vibration modes are calculated from layered models with perfectly bonded interfaces. A transcendental equation is used to determine the vibration frequency with given materials and plate thicknesses. By expanding the formulation to include the piezoelectric effect, we shall also be able to obtain the electrical field as a vital addition to mechanical vibration solutions. Of course, the piezoelectric effect will also be included in the frequency and displacements. The solutions can be used to calculate the electrical circuit parameters of a resonator.For electrical circuit parameters, the introduction of material viscosity will enable the formulation and calculation of FBAR properties with solutions of wave propagation. One approach to treat material viscosity is to assume the elastic constants as complex constants, in which the real part is the elastic constant and the imaginary part is the viscosity that is related to the frequency. In the mean time, the governing equations should be kept unaltered. However, since the viscosity constants of the film material are not available, so the viscosity of each material can be assumed to enable the calculation of the electrical parameters. The results can be compared with the measured electrical parameters, such as the quality factor. Then, a reasonable estimation of the viscosity of the film meterials can be obtained.The theoretical approach we present here will provide the first step for precise estimation of the thickness and electrical parameters so as to obtain the design frequecy. Of course, these one-dimensional formulation based on the infinite plate assumption can be further improved through the consideration of finite plates and numerical solutions based on the commonly used finite element analysis.

Related Dissertations

  1. Effect of Limestone Powder on Properties of Concrete Mixture,TU528
  2. Study on Spinning of High Viscosity Polyamide-6/Rare Earth,TQ340.64
  3. Prototype Development of Intimate Apparel Mannequin,TS941.2
  4. Study on the Retrieval of Aerosol Optical Thickness Based on HJ and MODIS Data,X513
  5. Synthesis and Properties of Novel Low Viscosity Difluorooxymethylene-Bridged Liquid Crystals Compounds,O753.2
  6. Serum Levels of Insulin Like Growth Factor-1 and Cardiovascular Remodeling in Patients with Hypertension,R544.1
  7. Relationship between Carotid Artery Atherosclerosis and Coronary Artery Lesion in Patients with Coronary Heart Disease,R541.4
  8. Explore elastosonography carotid artery in patients with essential hypertension and flexibility in the application of radial artery,R544.1
  9. OCT in early diagnosis of primary glaucoma clinical application of,R775
  10. Study on the Reasonable Cover Thickness of Subsea Tunnel,U459.5
  11. High-frequency Ultrasound in Evaluation on Impact of Glycosylated Hemoglobin to Carotid Intima-medial Thickness and Remodeling of Carotid Atherosclerosis for Type 2 Diabetes Mellitus Patients,R445.1
  12. The Analysis of the Retinal Thickness in Refractory Amblyopia Eyes,R777.44
  13. The Rheological and Adhesion Properties of EVA-based Hot Melt Adhesives,TQ436.4
  14. The Study on Coal Ash Fusibility and Viscosity-temperature Characteristics,TQ530
  15. The Reducer Gaskets of Automobile Driving Axle Which Selective and Assembly Characteristics Analysis and Simulation Optimization,U463.212
  16. Effects of the High Viscosity Solution and Conductive Particles on Bubble-Electrospinning,TQ340.6
  17. Process Research on Fiber Laser-MIG Hybrid Welding Medium Thickness Aluminum,TG456.7
  18. Research of FBAR Temperature Sensor,TP212.11
  19. Design and Optimation for Cross Flow Fan in Air-conditioning,TH43
  20. Study on the Ductility of Reinforced Concrete Special-shaped Columns with Different Design Parameters,TU375.3
  21. Research on FBAR and Its Oscillator,TN752

CLC: > Industrial Technology > General industrial technology > Acoustic engineering > Vibration, noise and its control > The occurrence of vibration and noise
© 2012 www.DissertationTopic.Net  Mobile