Dissertation > Excellent graduate degree dissertation topics show

Large range of water cannons Design and Research

Author: YuZuoMin
Tutor: ZhangQing
School: Nanjing University of Technology and Engineering
Course: Mechanical Design and Theory
Keywords: CFD jet-flow VOF fire nozzle
CLC: TU998.13
Type: Master's thesis
Year: 2011
Downloads: 89
Quote: 0
Read: Download Dissertation

Abstract


In this dissertation, the main object of research was a long-distance water jet-flow device, and to design a new type of water jet-flow device that can go beyond the manufacture can be seen on the market is the target. The long-distance water jet-flow devices were mostly used during the extinguishing of fire on the high and super-high buildings, with a promising prospect. Meanwhile it could also be used in the anti-terrorist actives and even antimissile actives.To lay down, this dissertation discussed the different parameter of the nozzle, such as diameter of nozzle, velocity of the flow and so on, can bring about how different results. Then the best combination of diameter and velocity which could result in the good effect as well as long distance was chosen, and then with the basic parameters, the shape of nozzle can be decided. In this dissertation, the judgment of the effect of jet-flow was based on the simulate result of Fluent. Finally the 150mm of diameter and 20m/s velocity is the best combination than can make a distance of 140m jet-flow.What’s more, on the base of the result obtained from the simulation, the design of nozzle can be done. Finally, the taper angle to be 14°and the diameter to be the two times of the diameter of the nozzle was decided. Under these parameters, the effect to the water-jet was the best.Moreover, with the data gained from the simulate former the three-dimensional model in the soft-ware pro/E was built. The jet-flow device was designed with a gearing of worm and gear and stepper motor. Then a flow simulate of the fluid state in the pipes was made to make sure the energy losing do not be too much. Then compared with the result of simulate, whether the simulation was right or not can be judged.Finally, according to the momentum law the recoil was calculated, and then the structural simulate was made to estimate whether the strength of structure can meet our need.During the dissertation, just the simulate of fluid and structure was made, although the result of practical production is similar to the simulating result. However there were not any experiments or production manufactured accord to the parameters gotten from the simulating.

Related Dissertations

  1. Basic Study on Jet Characteristics of Supersonic Coherent Jet Oxygen Lance,TF341
  2. Based on the theory of hydraulic oil jet technology research,V233.2
  3. Study of Experiments and CFD Simulation of Open Raceway Pond Photo-bioreactor for Energy Microalage,Q949.93
  4. Numerical Simulation on Submerged Abrasive Water Jet of the Straight-cone Nozzle,TG664
  5. Investigation on the Turbulence Characteristics in the Near Field of Round Jet Flow with DNS, RANS and LES,O357.5
  6. Numerical Simulation Study on Flow Field and Rock-Breaking for Self-Propelled Nozzle Applied in Hydraulic Deep Penetration,TE257.1
  7. Research on Methods for Extracting the Features of the Air Flow Field for the Single-Level Burner of a Tangentially Fired Boiler,TK221
  8. Elevator guide shoe sliding friction system research and application,TU857
  9. Energy efficient stirrer numerical simulation and performance prediction,X703.3
  10. Research on Planing of Residential Thermal Environment and Micro Climate Design,TU119.4
  11. Study of nonlinear dynamic labyrinth seal gas,TH136
  12. Structure Strength Analysis of Impeller and Guide Vane Chamber of Mixed Flow Waterjet Pump,U664.3
  13. Heat Load Experimental Measurement and Three Dimensional Numerical Simulation of Data Center,TU831
  14. A Heat Transfer Study on the Horizontal Rectangular Fin Arrays for the LED Street Lamp GH-4,TK124
  15. Numerical Simulation and Optimization of Cooling Jacket in the Gasoline Engine by CFD,TK414.2
  16. Aerodynamics Research on High-Speed Train Passing Through a Tunnel,U451.3
  17. Research on Aerodynamic Drag Reduction of High-speed Train with Non-smooth Surface,U270.1
  18. CWS -based wet grinding ball mill grinding chamber flow field analysis,TD453
  19. Sterile Isolating Device Research and Its CFD Simulation,R197.39
  20. The Aerodynamic Design of Seamless High-lift System Based on Circulation Control Technology,V224.5
  21. Research on the Effect of Wind Pressure Ventilation of Office Buildings,TU834

CLC: > Industrial Technology > Building Science > Municipal Engineering > Other municipal works and utility equipment > Fire control > Fire-fighting equipment
© 2012 www.DissertationTopic.Net  Mobile