Dissertation > Excellent graduate degree dissertation topics show

Research on Applicable Maximum Height of Masonry Structure and Frame Structure for Intensity 8 (0.3g)

Author: CaoLong
Tutor: XuHu
School: Xinjiang University
Course: Structural Engineering
Keywords: 8 degrees 0.3g Brick structure Frame structure The application of high
CLC: TU398.5
Type: Master's thesis
Year: 2008
Downloads: 46
Quote: 0
Read: Download Dissertation

Abstract


The current building seismic code provisions , seismic intensity of 8 degrees district includes basic design earthquake acceleration of 0.2g and 0.3g two districts . Specifications for these two districts , respectively, calculated earthquake , same basic seismic measures . 0.3g area 0.5 times larger than 0.2g earthquake , resulting in actual engineering specification states that the total height and number of layers of of 8 degrees district brick structure should not exceed 6 layer 18 meters , the frame structure The maximum applicable should not be more than 45 meters in height , \By multiple design analysis applicable height of 8 degrees 0.3g region brick structure and frame structure , draw the following conclusions : ( 1 ) select the the eight brick structure of the three types of layout structural design and seismic check using PKPM software analysis and comparison of the 8 degrees 0.2g areas and 8 degrees 0.3g brick structure in the applicable number of layers and the height difference , and to draw brick structure in the application of 8 degrees 0.3g region the number of layers and height should be higher than the 8 degrees 0.2g applicable , the number of layers and reduced the height of the ground floor and three meters . The proposed seismic codes alone to carry out the provisions of the applicable height and number of layers of brick and concrete structure of the of 8 degrees 0.3g region , the current specification \(2) selected the different layout frame structure , using PKPM Series software SATWE program spot ground conditions for the second category , the earthquake packet were two groups for each layout different layers the structural design . Variation member section size and the amount of steel with the growth in height and the number of layers ; compared with the amount of steel superstructure, and applicability initially analyzed spot ground conditions for the two types earthquake packet for the two groups , the applicable height of 8 degrees 0.3g regional framework structure should not be more than 30 meters . Also compared the differences in the amount of steel frame structure in 8 degrees 0.2g areas and 8 degrees 0.3g region .

Related Dissertations

  1. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  2. Analysis of Nonlinear Finite Element with Opening Infill Wall Frame Structure,TU323.5
  3. Shaking Table Test Study on the Seismic Performance of the 1/2 Model of the Energy–saving Block & Invisible Multi-ribbed Frame Structure,TU352.11
  4. Research on the Frame Reconstruction of A Company Based on Project,F272
  5. Experimental Study on Progressive Collapse Resistance of Non-seismic Reinforced Concrete Structures,TU375.4
  6. A Comparative Study on Design Method of Frame Column,TU391
  7. Study on Influence of Cast-in-situ Slab on RC Frame Structure Achieving "Strong Column Weak Beam",TU375.4
  8. A Study on Seismic Assessment and Retrofit Technology of Existing RC Frame with Single Bay,TU352.11
  9. Reseach on the Progressive Collapses Resistance Performance of Reinforced Concrete Frame Structure,TU375.4
  10. The Design and Research of Brick Structure Seismic Strengthening Methods,TU398.5
  11. The Plastic-elastic Finite Element Analysis for the Longitudinal Supported Frame Construction of the Main Thermal Power Plants,TU313
  12. Study on Load-bearing Behavior of SRC Frame Structure with Special-shaped Columns,TU398.9
  13. Experimental Study on Progressive Collapse Resistance of Non-seismic Reinforced Concrete Structures,TU375.4
  14. Seismic Isolation of the Multi-storey Building Subjected to Blast Loading in Underground Tunnel,TU352.12
  15. Study on Dynamic Characteristics of Steel Frames with Reduced Beam Sections,TU391
  16. The New SMA Complex Damper and Study on Seismic Behavior of Bottom Frame Brick Structure Based on SMA Damper,TU352.11
  17. Dynamic Response and Damage Analysis on Chemical Equipment Supporting Framework Structure under the Explosion,TU375
  18. Fragility Analysis for Vertical Irregular Reinforced Concrete Frame Structures Subjected to Pulse-like Ground Motions,TU375.4
  19. Incremental Dynamic Analysis of the Reinforced Concrete Frame Structure,TU375.4
  20. Longnan Wenchuan earthquake damage investigation and analysis of housing,TU352.11
  21. Study on the "Strong-Beam-Weak-Column" Failure Pattern of RC Frame Structure,TU375.4

CLC: > Industrial Technology > Building Science > Building structure > Composite structure > Brick, concrete hybrid structure
© 2012 www.DissertationTopic.Net  Mobile