Dissertation > Excellent graduate degree dissertation topics show

Pseudo-Dynamic and Pseudo-Dynamic Sub-Structure Test of High Order Single Step Method

Author: TaoShaoHua
Tutor: WangHuanDing
School: Harbin Institute of Technology
Course: Engineering Mechanics
Keywords: high order single step method pseudo-dynamic test sub-structure test numerical simulation
CLC: TU317
Type: Master's thesis
Year: 2007
Downloads: 108
Quote: 0
Read: Download Dissertation

Abstract


The pseudo-dynamic test(referred to as the on-line computer controlled test) which is the most comprehensive used one of the seismic tests is an experimental technique for simulating the seismic response of structures and the structural components .With advantage of static cyclic testing and shaking table testing ,the pseudo-dynamic test used loading test technology and computer technology together. Not only did it overcame shaking table testing of the surface size and pedestal bearing capacity constraint, but it also avoided the need for computer simulation that assume the characteristics of resilience, which may reproduce slowly the entire process of reaction of structural seismic from elastic to collapse.The pseudo-dynamic test of the latest trends is to improve numerical integration algorithm and test controlled techniques. In order to improve the test controlled results, this paper is to improve mainly from the perspective of numerical integration algorithm for the pseudo-dynamic test, so high order single step method is introduced. The existing pseudo-dynamic test widely used center difference method, PCM-Newmark method andαmethod (implicit) and made good test results. As high order single step method is unconditionally stable, non-beyond; whenβ= 0.5, the algorithm has four order accuracy ( ( )) (displacement, velocity, acceleration having the same order accuracy) without algorithm damping. Comparing high order single step method with the existing other commonly used algorithm, we can know that the conspicuous advantages of the algorithm is high speed, high precision, good stability and so on. This paper will use high order single step method to pseudo-dynamic test and sub-structure test and do numerical simulation. The following aspects of the research were studied in this paper:(1) Based on bilinear restoring force model, doing SDOF and two-DOF pseudo-dynamic numerical simulation test with high order single step method .(2) Based on the bilinear restoring force model, doing SDOF and two-DOF pseudo-dynamic numerical simulation test with central difference method.(3) Based on the bilinear restoring force model, doing pseudo-dynamic sub-structure numerical simulation test with high order single step method.According to numerical simulation analysis of the example, it is proved that high order single step method as a high precision, unconditional stability of the controlling algorithm to be used in pseudo-dynamic testing is extremely feasible. It was chose for pseudo-dynamic testing as an effective algorithm.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Building Science > Building structure > Structure theory to calculate > Structural Testing and Inspection
© 2012 www.DissertationTopic.Net  Mobile