Dissertation > Excellent graduate degree dissertation topics show

The Study on the Outlet Circulation of Mixed-flow Pump and It’s Effect on the Hydraulic Performance of the Outlet Pipe

Author: GuoRui
Tutor: ZhouJiRen
School: Yangzhou University
Course: Water Resources and Hydropower Engineering
Keywords: mixed-flow-pump pipeline numerical simulation circulation diversion grid
CLC: TV134
Type: Master's thesis
Year: 2008
Downloads: 143
Quote: 0
Read: Download Dissertation

Abstract


Great progress has been made in pumping station engineering of our country since 1960’.It has played an important role in flood fighting ,water-logged area draining, draugh fighting, irrigating, water transfering and water supplying. It is the key technique to improve the efficiency of pump set performances for pump station transformation. And the loss of hydraulic of outlet is an important factors to judge the efficiency of a pump performance. The influence of outlet circulation of mixed-flow pump on the hydraulic performance of the outlet pipe was studied in this dissertation.There is circulation in the outlet of pump which makes the water flow pattern in pipeline more complicated and adds the waterpower loss in pipeline and thereby lower function of the pump performance. This essay takes the outlet pipeline of 4HBC-35 spiral mixed-flow pump as the study object, sets up test equipment and conducts the test of pump performances functions and water power loss under different operating modes; uses five-holes probe and differential pressure transmitter to test the flow velocity distribution in different modes and different sections. Datas got in flow velocity distribution test can be used as the input boundary condition in numerical simulation calculation after being simplified. The 3-dimention solid modeling will be completed by adopting the ICEM software, and the solid mode grid subdivision of much higher precision and quality will be finished by applying structured grids, unstructured grids and grid local refinement encryption technique. A numerical simulation calculation can be conducted by applying renormalization group turbulence model in CFX software and some index as flow rate, pressure and waterpower loss, etc can be got .By comparing the experimental result and the numerical one, the result that the hydraulic loss will be increased when circulation exist is obtained. By 3D numerical simulation, taking the pressure recovery coefficient in pipe as index, the rectification measures which is fit for the mixed-flow pump will be got by analysing the influence on rectification result of diversion grid in different lengths and heights.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Design and Implementation of Processor TI DSP VC33 Virtual Kernel,TP332
  21. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13

CLC: > Industrial Technology > Hydraulic Engineering > The basic science of water resources project > Hydraulics > Pipeline Flow Mechanics
© 2012 www.DissertationTopic.Net  Mobile